079 27702711

+91 9714854011

Product Catalogues

Small Enterprise Environment Monitoring System

Small Enterprise Environment Monitoring System

Model No : E-2D

Weight In KG :0.45359

Weight In LB :1.0



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • Small Enterprise Environment Monitoring System (EMS) monitors critical environmental conditions (such as temperature, humidity, and water leakage) that could destroy network components in your server room. When a sensor goes out of range of a configurable threshold, the system will notify you via email, SNMP traps, web-page alerts, a visual indicator (red LED), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via email-to-SMS or external USB modem).
      • The system supports two external configurable sensors, five digital input sensors, and one output relay for control of external devices.
      • Monitor and manage server room environmental conditions over IP.

Sensors supported by a single E-2D:

      • 2 external configurable sensors
      • 5 digital inputs sensitive to contact closure
      • 8 Remote Temperature/Humidity Sensors over IP
      • E-MICRO-TRH(P): 1 integrated temperature/humidity combination sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, optional built-in Power over Ethernet (POE), dual DC power.
      • 4 Remote 1-Wire Sensors over IP
      • E-1W(P): two RJ11 connectors for daisy chaining many 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination (up to 24 single-reading 1-wire sensors); two digital inputs sensitive to contact closure; dual DC power; optional Power over Ethernet (POE).
      • Use an RJ45 RS485 Sensor Expander to add 8 RJ45 RS485 sensors.
      • Use a Digital Input/Output Expander to add 16 digital inputs and 16 digital outputs.
      • One output relay for control of external devices.
      • Relay activates upon alarm or via the user interface.
      • Control output relays via SNMP SET commands to power on/off external devices.
      • Supports NTI's IP network video cameras for live view of any facility.
      • One integrated view – see different Web cameras side-by-side with physical and environmental parameters.
      • Any programmed event can trigger a snapshot from an IP camera.
      • Monitor (ping) up to 64 IP network devices.
      • Alerts are sent if devices are not responding.
      • Linux inside.
      • Create multiple alerts for any installed sensor.
      • Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
      • Configure up to 50 events.
      • Setup SSH commands to be sent when events are triggered to soft shutdown or reboot machines.
      • Up to 20 Smart Alerts can be configured to use different event combinations to send alert messages.
      • Alerts are posted in message log, which is accessible through Web user interface.
      • Automatically configures network settings received from a connected DHCP server.
      • If a DHCP server is not found, the default static IP address will be used.
      • Integrates with various Open Source monitoring packages – Nagios and MRTG.
      • The unit can be polled via SNMP.
      • Two USB ports for connecting USB modem or for downloading log data to USB flash drive, and one USB console port for serial terminal interface.
      • Available with optional internal battery backup.
      • Alerts are sent when there is a power outage and when power returns.
      • Available with optional 24VDC or 48VDC power, or optional built-in Power over Ethernet (PoE).
      • Up to five units can be used together to increase the number of sensors connected.
      • Cascade up to four E-2D/5D/16D units as slaves to one E-2D/5D/16D master unit via Ethernet connection.
      • Each master and slave unit needs its own unique IP address.
      • Uses a single Web interface for all systems/sensors connected.
      • Dual redundant power supplies for connection to two separate power sources.
      • The second power supply is sold separately.
      • Optional industrial small environment monitoring system for high temperature environments. This industrial system has the ability to operate and monitor in harsh environments at high temperatures up to 167°F (75°C).
      • Optional Self-Hosted Enterprise Environment Monitoring System Management Software for monitoring and configuring up to 3,000 E-2D/5D/16D/MICRO/1W devices and all connected sensors. Access from anywhere using a web browser on a computer, smartphone, and/or tablet. No clients or special apps to install.
      • Flexible Zero-RU mounting.
      • Mounting tabs included.
      • Optional 1RU rackmount kit available; the ENVIROMUX unit can be mounted with the front or rear facing out.
      • Optional DIN mounting available.
      • Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
      • Multi-language support – English, German, Chinese, and Japanese.
      • Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
      • Use the E-2D with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System.
      • Configure, monitor, and receive alerts without the use of a wired network connection. 

TECHNICAL 

RJ45 Sensor Ports
    • Two female RJ45 jacks for connecting NTI temperature, humidity, liquid detection, smoke detection, glass break, vibration, motion sensors, and more.
    • Two levels of user-defined alerts – non-critical and critical.
    • Provides +12 VDC, 100 mA for each port.

Dry Contact Closures
    • Five screw terminal pairs for connecting dry contact devices and the liquid detection sensor.
    • Potential-free.
    • Output voltage: +5 V DC
    • Current limited to 10 mA
    • Maximum resistance to close contact: 300K Ohm

Output Relay
    • One screw terminal pair.
    • Potential-free relay switch contacts.
    • Normally open / normally closed connection points.
    • Maximum switching load: 1A at 125VAC or 30VDC.

USB Ports
    • Two female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
    • One female USB Type B connector for connecting a PC for serial terminal access.

Ethernet Port
    • One female RJ45 connector.
    • 10/100 Base-T Ethernet interface.
    • Supports full- and half-duplex.

Power Output
    • AUX Power
    • One screw terminal pair.
    • Provides +12 VDC, 500 mA.

Optional Back-Up Battery
    • Rechargeable sealed lithium battery.
    • Provides back-up for two hours.

Protocols
    • HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, TLS v1.2, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0, RADIUS
    • Support for XOAUTH2 provides higher security authentication for email accounts (e.g. Gmail).
    • Compatible with any SNMP management software.
    • The unit can be polled via SNMP.
    • Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB serial interface.
    • Supports Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Netscape 9, Google Chrome, Safari 1.3 and higher for MAC, and Safari 3.0 and higher for PC.
    • Multiplatform support: Windows 7/8/10/11, Windows Server 2008/2012/2016/2019/2022, Solaris, Linux, FreeBSD, and MAC OS 10/11/12.
    • An IP address can be assigned to the E-2D automatically by a DHCP server.
    • Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).
    • Alerts are posted in event log, which is accessible through Web user interface.
    • Email alerts can be sent to 17 addresses.
    • Supports HTTP REST API to poll sensor data with response in JSON format.

Dimensions

WxDxH:

E-2D, E-2DB, E-2D-IND, E-2D-POE: 5.82x3x1.75 in (148x76x44 mm)

E-2D-D, E-2DB-D: 5.82x3.3x1.75 in (148x84x44 mm)

E-2D-24V, E-2D-48V: 10.63x3.11x1.75 in (270x79x44 mm)

Optional 1RU rackmount kit available
(E-RK1-2D).

The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.

Weight

E-2D: 1.0 lb (0.45 kg)

Power
    • Dual DC power.
    • If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the optional battery backup.
    • Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
    • Includes one 9VDC, 3A country-specific AC adapter. The second AC adapter is sold separately.
    • Voltage output: 9-12VDC
    • Power consumption: 10W.
    • Optional built-in Power over Ethernet (PoE)
    • Power over Ethernet standards supported: IEEE 802.3af, 802.3at.
    • Proprietary schemes such as Cisco Discovery Protocol are not supported.
    • Similar legacy switches and routers will have to use PWR-SPLY-9V3A
    • If the Power over Ethernet source fails, the unit will automatically, without interruption, switch over to the DC power source.
    • Optional 24VDC power.
    • Accepts 9~36VDC (24VDC nominal).
    • For installation in a 24V Telecom environment.
    • Optional 48VDC power.
    • Accepts 18~72VDC (48VDC nominal).
    • Use the PWR-48V-12V1-6A DC-DC power converter to install the E-2D in a 48V or 24V Telecom environment.

MTBF

E-2D: 229,580 hours.

E-2DB: 230,693 hours.

Environmental

Operating temperature:

E-2D: 32 to 140°F (0 to 60°C)

E-2D-IND: -4 to 167°F (-20 to 75°C)

Storage temperature: -22 to 140°F (-30 to 60°C).

Operating/Storage Relative Humidity: 5 to 90% non-condensing RH.

Regulatory Approvals

CE, RoHS

EN51055, EN50121-3-2

TAA compliant

Warranty

2 years


E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style Select Length of Low-Cost Water Sensor Cable (x): 1 Foot Cable 10 Foot Cable 50 Foot Cable 100 Foot Cable 200 Foot Cable 400 Foot Cable 600 Foot Cable $3.00 Per Foot Select Length of 2-Wire Cable (y): 5 Foot Cable 10 Foot Cable 20 Foot Cable 50 Foot Cable 100 Foot Cable No Additional Cost
E-LDx-y Liquid Detection Sensor, Plenum Rope-Style Select Length of Water Sensor Cable (x): 1 Foot Cable 10 Foot Cable 50 Foot Cable 100 Foot Cable 200 Foot Cable 400 Foot Cable 600 Foot Cable 800 Foot Cable 1000 Foot Cable $10.20 Per Foot Select Length of 2-Wire Cable (y): 5 Foot Cable 10 Foot Cable 20 Foot Cable 50 Foot Cable 100 Foot Cable No Additional Cost
E-CDx-y Chemical Detection Sensor Select Length of Chemical Sensor Cable (x): 1 Foot Cable 10 Foot Cable 50 Foot Cable 100 Foot Cable $24.50 Per Foot Select Length of 2-Wire Cable (y): 5 Foot Cable 10 Foot Cable 20 Foot Cable 50 Foot Cable 100 Foot Cable No Additional Cost
E-ALDS Addressable Leak Detection Sensor
E-LLDC-10 Liquid Location Detection Sensor Cable, 10 feet
E-LLDC-25 Liquid Location Detection Sensor Cable, 25 feet
E-LLDC-50 Liquid Location Detection Sensor Cable, 50 feet
E-LLDC-100 Liquid Location Detection Sensor Cable, 100 feet
E-4WNSC-10 4-Wire Non-Sensing Cable, 10 feet
E-4WNSC-25 4-Wire Non-Sensing Cable, 25 feet
E-4WNSC-50 4-Wire Non-Sensing Cable, 50 feet
E-4WNSC-100 4-Wire Non-Sensing Cable, 100 feet
E-LD-SPDT Liquid Detection, Spot Detector
E-SLDO-14 Compact-Size Spot Liquid Detector, Point Leak Detection Sensor, 24V/0.5A US power supply
E-SLDO-14-240VTR Compact-Size Spot Liquid Detector, Point Leak Detection Sensor, 240/208/120 to 24 VAC power transformer and country-specific line cord
E-SLDO-A Spot Liquid Detector with Built-In Visual & Audible Alarm
E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
E-SOD-3M Outdoor Oil Leak Detection Sensor
E-UCLD-1 Under Carpet Leak Detector, 1 ft
E-UCLD-10 Under Carpet Leak Detector, 10 ft
E-UCLD-25 Under Carpet Leak Detector, 25 ft
E-UCLD-50 Under Carpet Leak Detector, 50 ft
E-UCLD-100 Under Carpet Leak Detector, 100 ft
E-UCLD-200 Under Carpet Leak Detector, 200 ft
E-UCLD-400 Under Carpet Leak Detector, 400 ft
E-UCLD-600 Under Carpet Leak Detector, 600 ft
E-UCLD-1000 Under Carpet Leak Detector, 1000 ft
E-TLD-10 Liquid Detection - Tape-Style - 10'
E-TLD-25 Liquid Detection - Tape-Style - 25'
E-TLD-50 Liquid Detection - Tape-Style - 50'
E-TLD-100 Liquid Detection - Tape-Style - 100'
E-LLS-PF Plastic Vertical Liquid Level Float Switch
E-LLS-SF-10CM Stainless Steel Vertical Liquid Level Float Switch, 10cm
E-LLS-SF-25CM Stainless Steel Vertical Liquid Level Float Switch, 25cm
E-ULT Ultrasonic Level Transmitter for small tanks 49.2 inches or less
E-ULT25IS Intrinsically Safe Ultrasonic Level Transmitter, 25' Range
E-WFS-GD44 G1/2 Hall Effect Liquid Water Flow Sensor Switch
E-WFS-GE G3/4 Hall Effect Liquid Water Flow Sensor Switch
E-SDS-120V Smoke Detection Sensor - 120V
E-RLY-SDS120V Smoke Alarm Relay Module Compatible with E-SDS-120V
E-SDS-CELC-V2 Low-Cost Smoke Detection Sensor - CE Approved
E-SDS Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved
E-SDS-TAA-V2 Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved, TAA Compliant
E-CMD Carbon Monoxide Detector - CO
E-CO2-LC Carbon Dioxide Detector - CO2
E-GD-MBP Gas Detector – Methane, Butane, Propane
E-H2 Hydrogen Gas Detector
E-H2S Hydrogen Sulfide Detector
E-DUST Optical Dust Sensor
E-AFM Air Flow Sensor
E-AV-LC-7 Low-Cost Air Velocity Sensor, 7 ft, Includes RJ45 Coupler to Extend up to 1,000 ft
E-AV-K Air Velocity Sensor - Requires E-S5VDC
E-WSS Wind Speed Sensor/Anemometer
E-BPT Barometric Pressure Transmitter
E-PST500 Pressure Sensor Transmitter, 0 to 500 psi
E-PST100IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 100 psig
E-PST200IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 200 psig
E-PST500IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 500 psig
E-PST1000IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 1000 psig
E-PST3000IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 3000 psig
E-NLS Noise Level Sensor
E-FACS Fingerprint Access Control System
E-ACK-V2P Access Control Digital Keypad
E-RFID-CRD10 RFID EM Cards, 10-Pack
E-RFID-KYFB10 RFID EM Keyfobs, 10-Pack
E-EDR-SF Electric Strike Door Release (fail safe)
E-EDR-SCR-P Electric Strike Door Release (fail secure)
E-M-DCS3 Door Contact Sensor
E-M-DCS3-TAA Door Contact Sensor, TAA Compliant
E-DCS-PS2 Plunger-Style Door Contact Sensor
E-DCSR-V2 Rugged Door Contact Sensor
E-DCSR-U Rugged Door Contact Sensor with Universal Style Magnet
E-VSSB Vibration Sensor - Registers Movement & Shocks
E-VSSR-10 Rugged Vibration Sensor – Detect Over- or Under-Vibration in Machinery
E-FENCE1 Fence Vibration Sensor
E-GBS Glass Break Detection Sensor
E-IMD-LCV2 Low-Cost Infrared Motion Sensor – CE Compliant
E-IMD-O Outdoor Infrared Motion Sensor
E-IMD-OHM High-Mount Outdoor Infrared Motion Sensor
E-IMD-CM Ceiling Mount Infrared Motion Sensor
E-IMDM Adaptive Dual Microwave/PIR Motion Detector
E-PBD-SO50 Single Photobeam Detector, Indoor/Outdoor to 50'
E-PBD-DO90 Dual Photobeam Detector, Indoor to 190', Outdoor to 90'
E-PBD-DO190 Dual Photobeam Detector, Indoor to 390', Outdoor to 190'
E-PBD-DO290 Dual Photobeam Detector, Indoor to 590', Outdoor to 290'
E-PBD-DO390 Dual Photobeam Detector, Indoor to 790', Outdoor to 390'
E-TDS Tamper Switch
E-EBS Emergency / Panic Button
E-LIS Light Intensity Sensor
E-AVDS-CELC-V3 Low-Cost Automatic Voice Dialer System, CE, Calls 6 Phone Numbers, 3 Input Channels
E-AVDS-4G1 4G Automatic Voice Dialer – FDD B2/B4/B12
E-AVDS-4G3 4G Automatic Voice Dialer – FDD B1/3/5/7/8/20
E-AVDS-4G4 4G Automatic Voice Dialer – FDD B1/3/4/5/7/8/28
E-IPCAM-HNPO-P Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE)
E-IPCAM-WHNPT-V4 High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera
E-IPCAM-DHNPO-V2P High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)
E-4GU-1 USB 4G Modem – 4G LTE Bands: 1/2/4/5/7/28
E-4GU-3 USB 4G Modem – 4G LTE Bands: 1/3/7/8/28/40
E-BEEP1-P1 Rugged Miniature Piezo Alarm, 103 dB, Powered, 1 ft
E-4GU-5 USB 4G Modem – 4G LTE Bands: 1/3/7/8/20
E-BEEP1-P10 Rugged Miniature Piezo Alarm, 103 dB, Powered, 10 ft
E-ANT2-4GU Two External Antennas for 4GU Modem
E-4GU-6 USB 4G Modem, TAA Compliant – 4G LTE Bands: 1/2/3/4/5/7/8/12/18/19/20/25/26/28/38/39/40/41
E-BEEP1-1 Rugged Miniature Piezo Alarm, 103 dB, 1 ft
E-BEEP1-P50 Rugged Miniature Piezo Alarm, 103 dB, Powered, 50 ft
E-BEEP1-10 Rugged Miniature Piezo Alarm, 103 dB, 10 ft
E-BEEP1-P100 Rugged Miniature Piezo Alarm, 103 dB, Powered, 100 ft
E-BEEP1-50 Rugged Miniature Piezo Alarm, 103 dB, 50 ft
E-BEEP1-P200 Rugged Miniature Piezo Alarm, 103 dB, Powered, 200 ft
E-BEEP1-100 Rugged Miniature Piezo Alarm, 103 dB, 100 ft
E-BEEP1-P400 Rugged Miniature Piezo Alarm, 103 dB, Powered, 400 ft
E-BEEP1-P600 Rugged Miniature Piezo Alarm, 103 dB, Powered, 600 ft
E-BEEP1-200 Rugged Miniature Piezo Alarm, 103 dB, 200 ft
E-BEEP1-P800 Rugged Miniature Piezo Alarm, 103 dB, Powered, 800 ft
E-BEEP1-400 Rugged Miniature Piezo Alarm, 103 dB, 400 ft
E-BEEP1-P1000 Rugged Miniature Piezo Alarm, 103 dB, Powered, 1000 ft
E-BEEP1-600 Rugged Miniature Piezo Alarm, 103 dB, 600 ft
E-BEEP1-800 Rugged Miniature Piezo Alarm, 103 dB, 800 ft
E-BEEP1-1000 Rugged Miniature Piezo Alarm, 103 dB, 1000 ft
E-BEEP2-1 Miniature Piezo Buzzer, PCB Mount, 85 dB, 1 ft
E-BEEP2-10 Miniature Piezo Buzzer, PCB Mount, 85 dB, 10 ft
E-BEEP2-50 Miniature Piezo Buzzer, PCB Mount, 85 dB, 50 ft
E-BEEP2-100 Miniature Piezo Buzzer, PCB Mount, 85 dB, 100 ft
E-BEEP2-200 Miniature Piezo Buzzer, PCB Mount, 85 dB, 200 ft
E-BEEP2-400 Miniature Piezo Buzzer, PCB Mount, 85 dB, 400 ft
E-BEEP2-600 Miniature Piezo Buzzer, PCB Mount, 85 dB, 600 ft
E-BEEP2-800 Miniature Piezo Buzzer, PCB Mount, 85 dB, 800 ft
E-BEEP2-1000 Miniature Piezo Buzzer, PCB Mount, 85 dB, 1000 ft
E-SRN-M Piezo Siren, 108 dB
E-BCN-R Alarm Beacon - Small: 2.75x1.69 in (70x43 mm)
E-BCN-RL Alarm Beacon - Large: 3.94x3.46 in (100x88 mm)
E-SRN-BCNL-O IP65 Indoor/Outdoor Piezo Siren with LED Strobe Beacon, 110 dB, Blue
E-SRN-BCNR-O IP65 Indoor/Outdoor Piezo Siren with LED Strobe Beacon, 110 dB, Red
E-LTA-RYG LED Light Tower with Buzzer Alarm <96> Red, Yellow, Green
E-POE-IND Power Over Ethernet Adapter
E-ACVDRLY-515 AC Voltage Detector with Relay, NEMA 5-15 plug
E-ACVDRLY-C14 AC Voltage Detector with Relay, IEC C14 socket
E-ACDCLM AC & DC Voltage & Current Monitor
E-DCLM-6 DC Line Monitor
E-ACLM-P18-V2 AC Power Monitor with Relay 18A, 220 volts
E-ACLM-P12-V2 AC Power Monitor with Relay 12A, 110 volts
E-ACLM-P8-V2 AC Power Monitor with Relay 8A, 220 volts
E-S60VDC DC Voltage Monitor
E-AMP10-6-5 Hall-Effect Current Sensor, Solid-Core, 10A, 0.26" loop diameter
E-AMP20-6-5 Hall-Effect Current Sensor, Solid-Core, 20A, 0.26" loop diameter
E-AMP50-6-5 Hall-Effect Current Sensor, Solid-Core, 50A, 0.26" loop diameter
E-AMP50-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter
E-AMP100-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (100)
E-AMP200-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (200)
E-AMP300-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (300)
E-AMP400-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (400)
E-AMP30-SC21 Hall-Effect Current Sensor, Split-Core, 30A, 0.83" loop diameter
E-AMP50-SC21 Hall-Effect Current Sensor, Split-Core, 50A, 0.83" loop diameter
E-AMP100-SC21 Hall-Effect Current Sensor, Split-Core, 100A, 0.83" loop diameter
E-AMP200-SC21 Hall-Effect Current Sensor, Split-Core, 200A, 0.83" loop diameter
E-AMP500-SC21 Hall-Effect Current Sensor, Split-Core, 500A, 0.83" loop diameter
E-ACLM-3P480 3-Phase AC Power Monitor
E-CT50-SC10 AC Current Transformers, Hinged Split-Core, 50 Amps, 0.39 in Loop Diameter
E-CT100-SC16 AC Current Transformers, Hinged Split-Core, 100 Amps, 0.63 in Loop Diameter
E-CT250-SC24 AC Current Transformers, Hinged Split-Core, 250 Amps, 0.94 in Loop Diameter
E-CT500-SC36 AC Current Transformers, Hinged Split-Core, 500 Amps, 1.42 in Loop Diameter
E-CT2000-SC76 AC Current Transformer, Removable-Top Split Core, 2000A, 3.02x5.12 in Window
E-PLSD Programmable LED Sensor Display
E-RJ8-RS485 8-port RJ45 RS485 Sensor Expander
E-RJ8-RS485-D 8-port RJ45 RS485 Sensor Expander, Din Mount
E-RJ8-RS485-R 8-port RJ45 RS485 Sensor Expander, 1RU Rackmount
E-WIFI-RE Environment Monitoring System WiFi Range Extender
E-DI16DO16 Digital Input/Output Expander (Open-Collector Outputs)
E-DI16DOR16-V2 Digital Input/Output Expander, Normally-Open Relay Contact Outputs, Desktop
E-DI16DOR16-V2-D Digital Input/Output Expander, Normally-Open Relay Contact Outputs, DIN Mount
E-DI16DOR16-V2R Digital Input/Output Expander, Normally-Open Relay Contact Outputs, 1RU Rackmount
E-DI16DOR16-V22R Digital Input/Output Expander, Normally-Open Relay Contact Outputs, 1RU Dual Side-by-Side Rackmount
E-SER-2FOSMST RS485/RS232/RS422 to Fiber Converter/Extender, Singlemode, ST Connectors
E-SER-2FOMMSC RS485/RS232/RS422 to Fiber Converter/Extender, Multimode, SC Connectors
E-S420MA-24V 4-20mA Sensor Converter
E-S5VDC 12VDC Sensor Converter
E-2W-PLNM-3 Plenum 22 AWG 2-Wire Sensor Cable, 3 ft
E-2W-PLNM-6 Plenum 22 AWG 2-Wire Sensor Cable, 6 ft
E-2W-PLNM-10 Plenum 22 AWG 2-Wire Sensor Cable, 10 ft
E-2W-PLNM-25 Plenum 22 AWG 2-Wire Sensor Cable, 25 ft
E-2W-PLNM-50 Plenum 22 AWG 2-Wire Sensor Cable, 50 ft
E-2W-PLNM-100 Plenum 22 AWG 2-Wire Sensor Cable, 100 ft
E-2W-PLNM-300 Plenum 22 AWG 2-Wire Sensor Cable, 300 ft
E-2W-PLNM-500 Plenum 22 AWG 2-Wire Sensor Cable, 500 ft
E-2W-PLNM-700 Plenum 22 AWG 2-Wire Sensor Cable, 700 ft
E-2W-PLNM-1000 Plenum 22 AWG 2-Wire Sensor Cable, 1000 ft
E-2WO-3 Outdoor 22 AWG 2-Wire Sensor Cable, 3 ft
E-2WO-6 Outdoor 22 AWG 2-Wire Sensor Cable, 6 ft
E-2WO-10 Outdoor 22 AWG 2-Wire Sensor Cable, 10 ft
E-2WO-25 Outdoor 22 AWG 2-Wire Sensor Cable, 25 ft
E-2WO-50 Outdoor 22 AWG 2-Wire Sensor Cable, 50 ft
E-2WO-100 Outdoor 22 AWG 2-Wire Sensor Cable, 100 ft
E-2WO-300 Outdoor 22 AWG 2-Wire Sensor Cable, 300 ft
E-2WO-500 Outdoor 22 AWG 2-Wire Sensor Cable, 500 ft
E-2WO-700 Outdoor 22 AWG 2-Wire Sensor Cable, 700 ft
E-2WO-1000 Outdoor 22 AWG 2-Wire Sensor Cable, 1000 ft
E-CLP10-LD Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10-pack
E-CLP100-LD Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 100-pack
SP-RS485-12V-O Weather Resistant Surge Protector for RS485 Control & 12VDC Power Lines
E-ISZB Zener Barrier – Intrinsically Safe Barrier
E-RK1-2D 1RU Rackmount Kit for E-2D
E-RK1-5DBIND 1RU Rackmount Kit for E-2D-24V and E-5D-48V
MK-DIN-E2D5DLXO DIN Mounting Kit for E-2D
E-RK1-2DDI16DOR16 1RU Rackmount Kit for Mounting E-2D and E-DI16DOR16-V2 Side By Side
PWR-48V-12V1-6A External 48VDC to +12VDC, 1.6A Power Converter
PWR-SPLY-9V3A 9V, 3A Power Supply for Dual Power on E-2D
E-BATTERY3 Replacement Back-up Battery for E-2DB
E-MNG-SH Manage 3000 E-2D/5D/16D units
E-MNG-SHNR Manage 3000 E-2D/5D/16D/MICRO/1W units. Uses non-renewing permanent license – does NOT require internet connection.
E-2D Small Enterprise Environment Monitoring System
E-2DB Small Enterprise Environment Monitoring System, Back-up Battery
E-2D-D Small Enterprise Environment Monitoring System, DIN Mount Kit Included
E-2DB-D Small Enterprise Environment Monitoring System, Back-up Battery, DIN Mount Kit Included
E-2D-24V Small Enterprise Environment Monitoring System, 24VDC Power
E-2D-48V Small Enterprise Environment Monitoring System, 48VDC Power
E-2D-IND Industrial Small Enterprise Environment Monitoring System for High Temperature Environments
E-2D-POE Small Enterprise Environment Monitoring System, Power over Ethernet (PoE)
E-MICRO-TRH Remote Temperature/Humidity Sensor over IP
E-MICRO-TRHP Remote Temperature/Humidity Sensor over IP, POE
E-1W Remote 1-Wire Sensor over IP
E-1WP Remote 1-Wire Sensor over IP, POE
E-STSM-E7 Plastic Probe-Style Temperature Sensor, -4 to 140°F (-20 to 60°C)
E-STSMA-E7 Aluminum Probe-Style Temperature Sensor, -4 to 140°F (-20 to 60°C)
E-STS Temperature Sensor, 32°F to 122°F (0°C to 50°C)
E-STSP-7 Pipe Temperature Sensor, -40 to 185°F (-40 to 85°C)
E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor, -4 to 140°F (-20 to 60°C)
E-STSP-SL-7 Strap-On Pipe Temperature Sensor, Spring-Loaded, -40 to 185°F (-40 to 85°C)
E-STHSB Temperature/Humidity/Dew Point Sensor, -4 to 185°F (-20 to 85°C)
E-STHS-LSH Fan-Aspirated Temperature/Humidity/Dew Point Sensor, Low Self-Heating
E-STHS-LCDW Temperature/Humidity Sensor with 3-Digit 7-Segment LCD Display – 2" Character Height
E-STHSB-D Temperature/Humidity/Dew Point Sensor, -4 to 185°F (-20 to 85°C), DIN Mounted
E-RTDT-140 100 Ohm Platinum RTD Transmitter, -20°F to 140°F (-28°C to 60°C)
E-STHS-PRC Low-Cost Precision Temperature/Humidity/Dew Point Sensor, 14 to 140°F (-10 to 60°C)
E-RTDT-240 100 Ohm Platinum RTD Transmitter, -30°F to 240°F (-1°C to 115°C)
E-RTDT-1562 High-Accuracy Platinum RTD Transmitter, -328°F to 1562°F
E-RTDS-MP240 Mini Probe 100 Ohm RTD Sensor, -67°F to 240°F (-55°C to 115°C)
E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor, -319 to 482°F, 4-Wire
E-RTDS-A221 All-Purpose 100 Ohm RTD Sensor, -67°F to 221°F (-55°C to 105°C)
E-RTDS-D240 Duct 100 Ohm RTD Sensor, -67°F to 240°F (-55°C to 115°C)
E-RTDS-A1112 All-Purpose 100 Ohm RTD Sensor, -328°F to 1112°F (-200°C to 600°C)
E-RTDS-ER230 Rugged Encapsulated 100 Ohm RTD Sensor, -30°F to 230°F (-34°C to 110°C)
E-RTDS-PAR540-2IN Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 1.25" to 2"
E-RTDS-PAR540-6IN Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 2" to 6"
E-STHSB-N4085IND-10 Industrial Temperature/Humidity Sensor with 10 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
E-RTDS-PAR540-12IN Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 6" to 12"
E-STHSB-N4085IND-25 Industrial Temperature/Humidity Sensor with 25 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
E-STHSB-N4085IND-35 Industrial Temperature/Humidity Sensor with 35 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
E-STHSB-N4085IND-50 Industrial Temperature/Humidity Sensor with 50 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
E-STHSB-N4085IND-100 Industrial Temperature/Humidity Sensor with 100 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
E-STS-O IP65 Outdoor Temperature Sensor