079 27702711

+91 9714854011

Product Catalogues

Low-Cost HDMI Over Gigabit IP Extender with IR and Power over Ethernet (POE)

Low-Cost HDMI Over Gigabit IP Extender with IR and Power over Ethernet (POE)

Model No : ST-IPHD-POELC-V4

Weight In KG :0.49895

Weight In LB :1.1



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

            • Low-Cost HDMI Over Gigabit IP Extender with IR and POE multicasts digital video and audio signals to one or more receivers up to 394 feet away over a 1000 Base-T Gigabit Network connected with CAT6/6a/7 cable.
              Each Low-Cost HDMI Over Gigabit IP Extender with IR and POE consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.
            • Supports HDTV resolutions to 1080p.
            • Extend up to 394 feet (120 meters) with CAT6/6a/7 cable.
            • Extend up to 328 feet (100 meters) with CAT5e cable.
            • Cascade network switches to extend the length long distances.
            • Up to three switches can be cascaded.
            • The max cable length between the first switch/transmitter and the last switch/receiver is 1,575 feet (480 meters) for CAT6/6a/7 or 1,312 feet (400 meters) for CAT5e cables.
            • The max cable lengths between switches is switch dependent, but 394 feet (120 meters) is typical with CAT6/6a/7 cable.
            • Power over Ethernet (PoE) – power supply not required at the local or remote unit.
            • Ideal solution for digital signage applications.
            • Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
            • Transmits an HDMI signal over one CATx cable.
            • Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
            • Plug-and-Play installation allows receivers to find the transmitters automatically on the same subnet. (Network configuration may be required for managed network switch.)
            • Easily expandable. Add remote units as you add monitors.
            • Inexpensive CATx cable replaces bulky video cables.
            • Supports 1000 Base-T Ethernet connection.
            • Built in default EDID table.
            • HDMI 1.4 and HDCP 1.4 compliant.
            • Support for multiple transmitters requires a managed network switch with VLAN support. Standard LAN switches can only support one transmitter.
            • The managed switch must support port-based IEEE 802.1Q VLAN.
            • Each VLAN acts as a separate HDMI Over IP Channel on the network.
            • Each VLAN channel supports one transmitter.
            • Number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
            • For a point-to-many connection, a standalone network with an unmanaged network switch, hub, or router can be used instead of a managed network switch.
            • Up to 253 receivers supported.
            • It is not recommended to use any other network devices on this standalone network as it may cause a degradation in performance.
            • Local and remote units must be in the same LAN. The units do not support WAN connections.

        TECHNICAL 

        Local Unit

            • One female HDMI-A port for source connection.
            • One female 1000Mbps RJ45 port for sending high definition video/audio signals.
            • One female 3.5mm port for IR emitter (included).
            • IR frequency range: 20 to 60 Khz.
            • Supported input resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
            • Encoding delay: 80 ms latency
            • Supports HDCP 1.4

        Remote Unit

            • One female HDMI-A port for HDTV or computer display.
            • One female 1000Mbps RJ45 port for receiving high definition video/audio signals.
            • One female 3.5mm port for IR receiver (included).
            • IR frequency range: 20 to 60 Khz.
            • Supported output resolutions: 480p@60Hz, 576p@50Hz, 720p@50/60Hz, 1080p@50/60Hz
            • Supports embedded digital audio through HDMI compatible TVs or audio receivers.
            • Supports HDCP 1.4

        Power

            • Power over Ethernet: With a switch that supports Power over Ethernet, a power supply is not required at the local or remote unit.
            • Compliant with IEEE 802.3af, class 0 standards.
            • Local and remote unit:
            • Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included).
            • Country-specific AC adapter sold separately
            • (PWR-SPLY-IPHDPOELCV4).
            • Output: 5VDC, 3.0A
            • Power consumption:
            • Local: 4.5W
            • Remote: 3.5W

        Cables

            • Use HD-xx-MM cable to connect an HDMI source or display up to 50 feet.
            • Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
            • Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet away from the transmitter.
            • Use DVI-HD-xx-MM cable to connect a DVI source up to 5 meters.
            • Use CATx solid or stranded straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors.
            • Extend to 394 feet (120 meters) over CAT6/6a/7 cable.
            • Extend to 328 feet (100 meters) over CAT5e cable.
            • Cables not included.
        Max Distance

        394 feet (120 meters) over CAT6/6a/7 cable.

        328 feet (100 meters) over CAT5e cable.

        Dimensions

        WxDxH: 4.44x3.71x0.94 in (113x94x24 mm)

        Environmental

        Operating temperature: 32 to 140°F (0 to 60°C).

        Storage temperature: -4 to 158°F (-20 to 70°C).

        Operating and storage relative humidity: 0 to 95% non-condensing RH.

        Regulatory Approval

        CE, FCC, RoHS

        Warranty

        2 Years



        HD-3-MM 4K@60Hz, 1080p@120Hz (Length- 3 feet)
        HD-6-MM 4K@60Hz, 1080p@120Hz (Length- 6 feet)
        HD-10-MM 4K@60Hz, 1080p@120Hz (Length- 10 feet)
        HD-15-MM 4K@60Hz, 1080p@120Hz (Length- 15 feet)
        HD-25-MM 1080p@60Hz (Length- 25 feet)
        HD-30-MM 1080p@60Hz (Length- 30 feet)
        HD-50-MM 1080p@60Hz (Length- 50 feet)
        DVI-HD-1M-MM 1 meter
        DVI-HD-2M-MM 2 meter
        DVI-HD-3M-MM 3 meter
        DVI-HD-5M-MM 5 meters
        ST-IPHD-L-2GOPOE Local Unit with Power over Ethernet
        ST-IPHD-R-2GOPOE Remote Unit with Power over Ethernet
        PWR-SPLY-IPHD2GO 9V 1.5A Power Supply. Compatible with ST-IPHD-L/R-2GOPOE