The HDMI Extender via Fiber Optic Cable locates an HDMI display up to 980 feet (300 meters) away from a video source using a single SC multimode fiber optic strand. Each extender consists of a transmitter that connects to a video source and a receiver that connects to a display.
Signal transmission via single-strand multimode SC fiber optic cable – no RF interference.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
Compact and durable design — allowing for easy connection and placement.
HDMI features supported:
12-bit Deep Color
Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS
Bandwidth up to 3.5 Gbps per channel
HDCP compliant.
Supports the DDC2B protocol.
Supports full 60fps video.
No software to install.
Cables can be installed in conduit prior to extender
installation.
TECHNICAL
Connectors
(for transmitter and receiver):
One male HDMI connector.
One simplex SC fiber optic port for sending/receiving high definition video/audio signals, and DDC signal.
Resolutions:
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 up to 980 feet (300 meters)
Supports full 60fps video.
Power
Transmitter: powered from attached video source.
Receiver: 110 or 220 VAC at 50 or 60 Hz via AC adapter. (US, EURO, UK, or AUS AC adapter included.)
Max Distance
980 feet (300 meters) over 50µm or 62.5µm multimode SC fiber optic cable.
Cables
Use a simplex SC multimode 50-micron fiber optic cable (FIBER-S-SCSC-50-xxM) or 62.5 micron fiber optic cable to extend the receiver from the transmitter up to 980 feet (300 meters).
Cables not included.
Dimensions
3.33x1.31x0.46 in (85x33x11 mm) with 8.5-inch (216-millimeter) male HDMI cable attached (local and remote unit)