The DVI Extender transmits digital DVI video and IR signal up to 300 feet away from a DVI source over a single CAT5/6/7 cable. Each video extender consists of a local unit that connects to a single link digital DVI source and IR emitter, and a remote unit that connects to a DVI display and IR receiver.
Transmits all signals over one CAT5/6/7 cable.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
Full IR control of DVI source from remote HDTV using existing source remote control.
HDCP compliant.
Supports the DDC2B protocol.
High quality, rugged steel construction with durable powder coat finish.
Only one power supply is necessary to power both the local and remote units.
TECHNICAL
Local Unit
Compatible with a computer or HDTV video source with DVI output.
One female DVI-I connector.
Signal type: single link digital DVI.
IR extension support: one female 3.5 mm port for IR emitter.
One female RJ45 port for sending/receiving high definition video, IR and DDC signals.
Latency: 40 ns
Jitter: 1.230 ns
Remote Unit
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
One female DVI-I connector.
Signal type: single link digital DVI.
IR extension support: one female 3.5 mm port for IR receiver.
One female RJ45 port for sending/receiving high definition video, IR and DDC signals.
Auto equalization for different lengths of CAT5/6/7 cable.
Power
Powered from a single power supply attached to either the local or remote unit.
Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)
Power consumption: 10 W.
Heat dissipation: 34 Btu/h.
Max Distance
98 feet (30 meters), line-of-sight.
Designed to transmit inside of a room.
Cables
Use DVI-IS-xx-MM cable to connect a DVI source or display.
Use DVI-HDMI-xx-MM cable to connect an HDMI source or display.
Use DPMM-DVIDF-CBL adapter cable to connect a Mini DisplayPort source or display.
Use CAT5/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
IR transmitter/receiver included.
Dimensions
WxDxH: 3.09x3.49x1.08 in (78x89x27 mm)
Environmental
Operating temperature: 32 to 122°F (0 to 50°C).
Storage temperature: -20 to 140°F (-30 to 60°C).
Operating/storage relative humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, RoHS
Warranty
2 Years
Distances
and Resolutions for CAT5e/CAT6 and CAT7 Cables