The DVI-D Dual Link Extender via Fiber Optic Cable extends a digital flat panel display up to 1,640 feet (500 meters) away from a DVI-D dual link video source using a 2-strand fiber optic cable. Each DVI optical extender consists of a transmitter that connects to a computer and a receiver that connects to a monitor.
Supports uncompressed 2560x1600 WQXGA and 3840x2400 WQUXGA resolutions for dual link devices.
Signal transmission via two-strand multimode LC fiber optic cable – no RF interference.
Small form factor – allowing for easy connection and placement.
Cables can be installed in conduit prior to extender installation.
Virtual DDC by self-EDID programming.
Low RFI/EMI for sensitive applications.
No software to install.
TECHNICAL
Connectors (for transmitter and receiver): one male DVI-D dual link connector and two LC fiber connectors.
Supports HDTV resolutions to 1080p and computer resolutions to 3840x2400.
3840x2400 at 33 Hz
2560x1600 at 60 Hz
Power
Transmitter and receiver: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (US AC adapters included.)
Max Distance
1,640 feet (500 meters) over 50µm or 62.5µm multimode LC fiber optic cable.
Cables
Use one duplex LC 50-micron or 62.5-micron multimode fiber optic cable to extend the receiver from the transmitter up to 1,640 feet (500 meters).
Dimensions
WxDxH: 1.54x2.83x0.59 in (39x72x15 mm)
Environmental
Operating temperature: 32 to 122°F (0 to 50°C).
Storage temperature: -22 to 158°F (-30 to 70°C).
Operating/storage relative humidity: 0 to 85% non-condensing RH.