The 4K HDMI Splitter/Extender simultaneously distributes uncompressed Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI video, multi-channel audio, and IR from one video source to up to four displays and speakers, each located up to 100 feet away via CATx cable.
The VOPEX-C64K18GB-4 system consists of two components: the 4K HDMI HDBase-T broadcast unit, which connects to the HDMI source and also supplies video to a local display; and a receiver (included) for each remote 4K HDMI display. The units are interconnected by CAT5e/6/6a/7 cable.
Transmits an uncompressed HDMI signal over one CATx cable to multiple display locations.
Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 100 feet.
Extend 4Kx2K 30Hz to 165 feet.
Extend 1080p to 200 feet.
Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @24/25/30/60Hz YUV 4:4:4) and HDTV resolutions to 1080p.
Support for CEC
(consumer electronic control) compatible device that is connected to the
transmitter.
Receivers do not support
CEC.
Lip Sync
HDCP 2.2 compliant.
Supports the DDC2B
protocol.
Built-in default EDID
table.
Ideal for digital
signage, tradeshows, or classrooms where high quality video on multiple
displays is needed.
TECHNICAL
Local Unit
Compatible with computers and UHD video sources (satellite receivers, Blu-Ray players, etc) with HDMI video.
Supports HDCP 2.2
Video bandwidth: 18 Gbps
One female HDMI connector for video source.
Does not support DVI video sources.
One female HDMI connector for local display.
Supports Ultra-HD 4Kx2K resolutions to 4096x2160 and HDTV resolutions to 1080p.
4Kx2K (4096x2160 and 3840x2160) at 24/25/30/60Hz YUV 4:4:4.
Does not support DVI displays.
One female 3.5mm port for IR transmitter.
IR frequency range: 20 to 60 kHz.
Four female RJ45 connectors for sending/receiving ultra-high definition video, audio, IR, and DDC signals.
Latency: 16mS
Remote Unit
Supports Ultra-HD 4Kx2K resolutions to 4096x2160 and HDTV resolutions to 1080p.
4Kx2K (4096x2160 and 3840x2160) at 24/25/30/60Hz YUV 4:4:4.
Refer to the resolution chart for resolutions using different CATx cable types and lengths.
One female HDMI connector for HDMI display.
Does not support DVI displays.
One female 3.5mm port for IR receiver (included).
IR frequency range: 20 to 60 kHz.
One female RJ45 HDBase-T connector for sending/receiving ultra-high definition video, audio, IR, DDC signals.
Supports embedded digital audio through HDMI compatible TVs or audio receivers.
Power
Local unit:
Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Output: 12VDC, 2A
Remote units:
Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Output: 12VDC, 1A
Max Distance
100 feet (30 meters) for Ultra-HD 4Kx2K 60Hz 4:4:4 over CATx cable.
200 feet (61 meters) for 1080p over CATx cable.
Cables
Use HD-xx-MM cable to connect an HDMI source or display.
Maximum HDMI cable length:
50 feet for resolutions up to 4K @ 30Hz
25 feet for resolutions up to 4K @ 60Hz
Use CATx solid or stranded straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors.
Cables not included.
Dimensions
Local unit WxDxH (in): 8.37x4.00x1.22 (212.6x101.5x31 mm) Remote unit WxDxH (in): 3.21x3.98x0.81 (81.6x101x20.6 mm) Environmental Operating temperature: 32 to 140°F (0 to 60°C). Storage temperature: -4 to 158°F (-20 to 70°C.) Operating/storage relative humidity: 20 to 90% non-condensing RH. Regulatory Approvals CE, FCC, RoHS Warranty Two years Max Distance 100 feet (30 meters) for Ultra-HD 4Kx2K 60Hz 4:4:4 over CATx cable. 200 feet (61 meters) for 1080p over CATx cable. Package Includes
Local unit WxDxH (in): 8.37x4.00x1.22 (212.6x101.5x31 mm)
Remote unit WxDxH (in): 3.21x3.98x0.81 (81.6x101x20.6 mm)
Environmental
Operating temperature: 32 to 140°F (0 to 60°C).
Storage temperature: -4 to 158°F (-20 to 70°C.)
Operating/storage relative humidity: 20 to 90% non-condensing RH.
Regulatory Approval
CE, RoHS
Warranty
2 Years
Package Includes
One transmitter
Four receivers
One IR blaster
Four IR receivers
Mounting brackets for transmitter and receivers
One 12VDC, 2A power adapter for transmitter.
Four 12VDC, 1A power adapters for receivers.
Distances and Resolutions for CAT5e/6/6a/7 Solid
or Stranded Cables