The Low-Cost HDMI Splitter/Extender simultaneously distributes 1080p HDMI video and multi-channel audio from one video source to up to four displays and speakers, each located up to 131 feet away via CATx cable.
The VOPEX-C5HD-4LC system consists of an HDMI broadcast unit, which connects to the HDMI source and also supplies video to a local display; and four included receivers for each remote HDMI display. The units are interconnected by CAT5e/6/6a/7 cable.
Transmits an HDMI signal over CAT5e/6/6a/7 cable to multiple display locations.
Extend 1080p/1920x1200 to 131 feet (40 m) and 720p to 230 feet (70 m)
Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
HDMI features supported:
HDMI 1.4
Up to 36-bit Deep Color
RGB, YCbCr 4:4:4, YCbCr
4:2:2
LPCM, AC3, DTS, Dolby
TrueHD, DTS-HD
Bandwidth up to 8.13 Gbps
Support for CEC
(consumer electronic control) compatible device that is connected to the
transmitter.
Receivers do not support
CEC.
HDCP 1.4 compliant.
Supports the DDC2B
protocol.
Built-in default EDID
table.
Includes four receivers.
Compact design – allows
for direct connection to remote display.
No power supply required.
Cascade two units
together to send video simultaneously to 8 receivers.
Ideal for digital
signage, tradeshows, or classrooms where high quality video on multiple
displays is needed.
TECHNICAL
Local Unit
Compatible with computers and video sources (satellite receivers, Blu-Ray players, etc) with HDMI video.
One female HDMI connector for video source.
One female HDMI connector for local display or for cascading to another VOPEX-C5HD-4LC.
Local display: Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
Cascading: Two units can be cascaded together for sending video simultaneously to 8 receivers.
Female DB9 serial connector for RS232 control and firmware updates.
Baud rate fixed at 57600.
Four female RJ45 connectors for sending high-definition video, audio, and DDC signals.
Supports HDCP 1.4
Video bandwidth: 8.13 Gbps
Remote Unit
Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
One female HDMI connector.
One female RJ45 connector for receiving high-definition video, audio, and DDC signals.
Supports embedded digital audio through HDMI compatible TVs or audio receivers.
Power
Local unit:
Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Output: 12VDC, 1A
Remote units: powered by local unit
Max Distance
131 feet (40 meters) for 1080p and 1920x1200 over CAT5e/6/6a/7 cable.
230 feet (70 meters) for 720p over CAT5e/6/6a/7 cable.
Cables
Interface cables between the video source/displays and the transmitter/receiver are required for proper operation.
Use HD-xx-MM cable to connect an HDMI source or display.
Use DVI-HD-xM-MM to connect a DVI source or display to the local unit.
Use HDMIF-DVIDM adapter to connect a DVI display to the remote unit.
Use CATx solid or stranded straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors.
Cables not included.
Dimensions
Local unit WxDxH (in): 6.57x3.98x1.57 (167x101x40 mm)
Remote unit WxDxH (in): 0.94x2.26x0.87 (24x58x20 mm)
Environmental
Operating temperature:
Local unit: 32 to 158°F (0 to 70°C).
Remote unit: 32 to 131°F (0 to 55°C).
Storage temperature:
Local unit: -4 to 257°F (-20 to 125°C).
Remote unit: -4 to 185°F (0 to 85°C).
Operating/storage relative humidity: up to 95% non-condensing RH.