This HDBaseT extender kit can transmit your 4K HDMI signal up
to 115 ft. (35 m) over a single CAT5e or CAT6 cable. At lower resolutions
up to 1080p, the extender kit can transmit your signal up to 230 ft. (70 m).
Extend video and
more with HDBaseT
The
extender offers a complete end-to-end video and control solution, using HDBaseT
technology to extend not just HDMI, but also DC power, IR and serial
control over a single CAT5 cable. By extending so much over just one CAT5e
or CAT6 cable, HDBaseT is the clear choice of every integrator and system
designer.
The
added benefit of power over cable means that you’ll only need one power source
at one side of your extension - great for extending video and control to
areas where power outlets may be limited, such as industrial sites.
Serial
and IR extension optimizes operation by enabling you to
control the video source or display from both the local and
remote location.
Maximize reliability
with HDBaseT certification
This
HDBaseT extender has been certified via the HDBaseT Certification
Program. This certification ensures the extender is compliant with
HDBaseT technical standards, and maximizes reliability with your HDMI display
and video source, by ensuring compliance with their established HDMI
ecosystem.
Astonishing 4K
picture quality at an impressive distance
With
the A/V industry adopting 4K as the new high-resolution video
standard, long-range video distribution can be a challenge
over standard HDMI cables that become susceptible to signal
degradation at 30 feet. This HDBaseT extender can maintain your Ultra HD
4K picture quality - four times the resolution of high-definition 1080p - even
at 330 feet away from your video source. Plus, because the extender supports
high-definition 1080p and lower resolutions, you can comfortably use this
extender to make any video source look great, while future-proofing
your setup for 4K implementation.
Professional
installation
HDBaseT
technology offers a single-cable installation, so you can integrate this
solution seamlessly using your existing CAT5e or CAT6 infrastructure. Both the
transmitter and receiver included with this HDBaseT extender kit
are mountable, so you can keep the equipment out of sight in an equipment
rack, or on a wall. This helps to reduce clutter and ensure a professional installation
that doesn't draw your viewers' attention away from the content on your
display. It’s perfect for customer-facing displays in bars, restaurants or
hotel lobbies.
What is HDBaseT?
HDBaseT
is a standardized, zero-latency video technology that’s revolutionizing HDMI
distribution. HDBaseT uses an advanced method of modulation that enables you to
distribute uncompressed HDMI audio and video, along with additional signals,
over a single Ethernet cable.
Offering
greater versatility than traditional HDMI extenders, and longer distances than
HDMI cables alone, HDBaseT is the clear choice for every integrator and system
designer. It can do so much, with just a single cable.
The
ST121HDBTL is TAA compliant and backed by a 2-year StarTech.com warranty with
free lifetime technical support.
Note: When
using Power over Cable (PoC) to power the transmitter or receiver, it is not
recommended to pair the StarTech.com transmitter or receiver with any other
HDBaseT hardware. Power over Cable should only be used with the
transmitter and receiver that are provided with this extender kit.
TECHNICAL
Warranty Information
2 Years
Connector(s)
AV Input : HDMI
AV Output : HDMI
Local Unit Connectors : 1 - HDMI (19 pin)
1 - DB 9-pin Serial
1 - RJ-45
1 - 3.5 mm Mini-Jack (3 Position) Remote Unit Connectors : 1 - HDMI (19 pin)
1 - DB 9-pin Serial
1 - RJ-45
1 - 3.5 mm Mini-Jack (3 Position)
Environmental
Operating Temperature : 0°C to 40°C (32°F to 104°F)
Storage Temperature : -10°C to 60°C (14°F to 140°F)
Humidity : 0% - 80 %
Hardware
Ports : 1
Cabling : Cat 5e UTP or better
Audio : Yes
Daisy-Chain : Yes
Indicators
LED Indicators : 1 - status LED (transmitter)
1 - status LED (receiver)
Packaging Information
Shipping (Package) Weight : 1.1 kg [2.4 lb]
Package Length : 28.1 cm [11.1 in]
Package Width : 19.4 cm [7.6 in]
Package Height : 70 mm [2.8 in]
Performance
Maximum Cable Length : 70 m [229.6 ft]
Max Distance : 70 m / 230 ft
Maximum Digital Resolutions : 4096 x 2160 (4K) @ 30 Hz (35 meters)
1920 x 1080 (1080p) @ 60 Hz (70 meters)
Supported Resolutions : 3840x2160 (4K)
2560x1600
1920x1200
1920x1080 (1080p)
1280x720 (720p)
Wide Screen Supported : Yes
Audio Specifications
Physical Characteristics
Color : Black
Material : Steel
Product Length : 92 mm [3.6 in]
Product Width : 66 mm [2.6 in]
Product Height : 2.7 cm [1.1 in]
Weight of Product : 452 g [16.0 oz]
Power
Power Source : AC Adapter Included
Input Voltage : 100 - 240 AC
Input Current : 0.6 A
Output Voltage : 12V DC
Output Current : 1.5 A
Center Tip Polarity : Positive
Plug Type : M
Power Consumption (In Watts) : 18
Special Notes / Requirements
Note : If you want to add more displays, you can daisy chain this product with the HDBaseT repeater ST121HDBTRP.