This conference
table connectivity box bundle provides power and charging
where it's needed and adds A/V connectivity and network access to your
boardroom, classroom or huddle space.
The StarTech.com bundle
contains three products to equip you with a convenient
out-of-the-box connectivity solution:
Power
Your Devices and Stay Charged During Meetings
Modern office
environments need to support technology more than ever, to keep laptops, phones
and tablets connected. During meetings you may need access to
power when your battery is running low or a meeting is running long.
This tabletop power
hub lets you power a laptop using the AC power outlet and charge
phones and tablets using the 2.4 amp USB ports, directly from
your conference table.
Easily Connect to
a Display
The A/V
module simplifies connectivity with automatic switching and conversion.
The module lets you present content from your HDMI, DP or VGA laptop on an
HDMI display or projector, without the hassle of menu and input
selections. And, it automatically switches to the most recently connected or
powered-on laptop.
Simple
Installation
The conference table
insert is easy to install and features a lid that closes to conceal
connection points. The cable organizer keeps cable accessible.
KITBXAVHDPEU is
backed by a StarTech.com 2-year warranty and free lifetime technical support.
TECHNICAL
Warranty Information
2 Years
Connector(s)
Connector A : 2 - HDMI (19 pin)
2 - VGA (15 pin, High Density D-Sub)
2 - 3.5 mm Mini-Jack (3 Position)
1 - RJ-45
2 - DisplayPort (20 pin)
Connector B : 1 - HDMI (19 pin)
1 - RJ-45
1 - 3.5 mm Mini-Jack (3 Position)
Input Connector(s) : 1 - CEE 7/7 Power (European)
Output Connectors : 1 - IEC 60320 C13 Power
2 - USB Type-A (4 pin) USB 2.0
Environmental
Operating Temperature : 0 to 60℃ (32°F to 140°F) (MOD4AVHD)
0 to 40℃ (32°F to 104°F) (MOD4POWEREU)
Storage Temperature : -20°C to 60°C (-4°F to 140°F) (MOD4AVHD)
-27℃ to 40℃ (-16.6°F to 104°F) (MOD4POWEREU)
Humidity : 10% to 85% (non-condensing) (MOD4AVHD)
8% to 90% (MOD4POWEREU)
Hardware
Active or Passive Adapter : Active
Passive AV Input : VGA
3.5 mm Audio
HDMI
DisplayPort
AV Output
HDMI
Audio : Yes
USB Pass-Through : No
Chipset ID : Parade - PS176
Chrontel - CH7035
Explore Micro - EP9442U
TI - TS3DV642
Indicators
LED Indicators : 2 - Power (1 - MOD4POWEREU, 1 - MOD4AVHD)
Packaging Information
Package Height : 24.0 cm [9.4 in]
Package Length : 14.0 cm [5.5 in]
Shipping (Package) Weight : 5.6 kg [12.3 lb]
Package Width : 36.0 cm [14.2 in]
Performance
Video Revision : HDMI 1.4
DisplayPort 1.2 Maximum Analog Resolutions : 1920 x 1080 60Hz
Maximum Digital Resolutions : 3840x2160 (4K) @ 30Hz (35 feet)
**Lower resolutions and refresh rates, not stated but below the maximum, may also be supported
Aspect Ratio : 16:9
Wide Screen Supported : Yes
General Specifications : (MOD4AVHD) Center Tip Polarity: Positive
(MOD4AVHD) Input Voltage: 100 ~ 240 AC
(MOD4AVHD) Output Current: 2 A
(MOD4AVHD) Output Voltage: 5 DC
(MOD4AVHD) Plug Type: M
(MOD4AVHD) Power Consumption (In Watts): 10
(MOD4AVHD) Power Source: AC Adapter Included
(MOD4POWEREU) Input Voltage: 110 ~ 240 AC
(MOD4POWEREU) Maximum Output Voltage: 240V
(MOD4POWEREU) Nominal Input Voltage: 110V ~ 240V
(MOD4POWEREU) Nominal Output Voltage: 110V ~ 240V
(MOD4POWEREU) Number of AC Power Outlets: 1
(MOD4POWEREU) Number of USB Power Ports : 2
(MOD4POWEREU) Output Current: 10 A
(MOD4POWEREU) Output Voltage: 5 DC
(MOD4POWEREU) Power Source: EU Power Cord Included Physical Characteristics
Product Height : 11.0 cm [4.3 in]
Product Length : 16.5 cm [6.5 in]
Weight of Product : 3.1 kg [6.9 lb]
Product Width : 31.8 cm [12.5 in]
Color : Black
Material : Aluminum, Steel and Plastic
Software
OS Compatibility : OS independent; No software or drivers required
Special Notes / Requirements
Note : VGA (Input) to HDMI (Output) - HDMI Output Port is Active
DisplayPort (Input) to HDMI (Output) - HDMI Output Port is Active
HDMI (Input) to HDMI (Output) - HDMI Output Port is Passive
Cables with ferrites may impact cable maneuverability within the cable hole. If ferrites are required, we recommend using cables with ferrites that are positioned as close to the connector as possible