079 27702711

+91 9714854011

Product Catalogues

Large Enterprise Environment Monitoring System

Large Enterprise Environment Monitoring System

Model No : E-16D

Weight In KG :4.30912

Weight In LB :9.5



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • Enterprise Environment Monitoring System (EMS) monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, alarm beacon, siren, web page, network management (SNMP), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via email-to-SMS or external USB modem).
      • The system includes three internal sensors: temperature, humidity and power. It also supports 16 external configurable sensors, eight digital input sensors, and four output relays for control of external devices.
      • Monitor and manage server room environmental and security conditions over IP.

Sensors supported by a single E-16D:

      • 16 external configurable sensors
      • 8 digital inputs sensitive to contact closure
      • 3 internal sensors – temperature, humidity, power
      • 8 Remote Temperature/Humidity Sensors over IP
      • E-MICRO-TRH(P): 1 integrated temperature/humidity combination sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, optional built-in Power over Ethernet (POE), dual DC power.
      • 4 Remote 1-Wire Sensors over IP

E-1W(P):

      • two RJ11 connectors for daisy chaining many 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination (up to 24 single-reading 1-wire sensors); two digital inputs sensitive to contact closure; dual DC power; optional Power over Ethernet (POE).
      • Use an RJ45 RS485 Sensor Expander to add 8 RJ45 RS485 sensors.
      • Use a Digital Input/Output Expander to add 16 digital inputs and 16 digital outputs.
      • Four output relays for control of external devices.
      • Relay activates upon alarm or via the user interface.
      • Control output relays via SNMP SET commands to power on/off external devices.
      • Supports NTI's IP network video cameras for live view of any facility.
      • One integrated view – see different Web cameras side-by-side with physical and environmental parameters.
      • Any programmed event can trigger a snapshot from an IP camera.
      • Monitor (ping) up to 64 IP network devices.
      • Alerts are sent if devices are not responding
      • Linux inside.
      • Create multiple alerts for any installed sensor.
      • Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
      • Configure up to 50 events.
      • Setup SSH commands to be sent when events are triggered to soft shutdown or reboot machines.
      • Up to 20 Smart Alerts can be configured to use different event combinations to send alert messages.
      • View entries stored in the system logs.
      • Event log records system events such as alerts, user login/logout, failed email messages, etc.
      • Data log records samples of sensor readings. User specified sampling time period.
      • With E-16D, up to 1,724 data log entries and 1,000 event log entries are stored.
      • With E-16DEL, up to 1,200,000 data log entries and 3,000 event log entries are stored.
      • 256 MB non-volatile memory - both the data log and event log persist after power cycle.
      • Automatically configures network settings received from a connected DHCP server.
      • If a DHCP server is not found, the default static IP address will be used.
      • Integrates with various Open Source monitoring packages - Nagios and MRTG.
      • The unit can be polled via SNMP.
      • USB ports for connecting USB modem or for downloading log data to USB flash drive.
      • Internal battery backup.
      • Alerts are sent when there is a power outage and when power returns.
      • Available with optional dual power for connection to two separate power sources.
      • Up to five units can be connected via Ethernet connection or using CAT5 expansion cables to increase the number of sensors connected.
      • Cascade up to four E-2D/5D/16D units as slaves to one E-2D/5D/16D master unit via Ethernet connection.
      • Each master and slave unit needs its own unique IP address.
      • Cascade up to four E-16D units as slaves to one E-16D master unit using CAT5/5e/6 patch cables with RJ45 connectors wired straight through.
      • Each slave unit needs its own unique RS485 address value that can range from 1-255.
      • Uses a single Web interface for all systems/sensors connected.
      • Available with optional 48VDC or 24VDC power.
      • Optional Self-Hosted Enterprise Environment Monitoring System Management Software for monitoring and configuring up to 3,000 E-2D/5D/16D/MICRO/1W devices and all connected sensors. Access from anywhere using a web browser on a computer, smartphone, and/or tablet. No clients or special apps to install.
      • 1RU rack mount case is standard.
      • The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.
      • Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
      • Multi-language support – English, German, Chinese, and Japanese.
      • Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
      • Use the E-16D with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System.
      • Configure, monitor, and receive alerts without the use of a wired network connection.

 

TECHNICAL 

1.Power Port
    • Input: 100 to 240 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.)
    • Power consumption: 35W
    • Connection for Earth Ground.
    • Fuse protection.
    • Optional 48VDC power (not shown).
    • Accepts 36~72VDC (48VDC nominal).
    • Optional 24VDC power (not shown).
    • Accepts 20~32VDC (24VDC nominal).
    • Optional dual power (not shown).
    • Available on AC, 48VDC, and 24VDC models.
    • If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the battery backup.

2. RJ45 Sensor Ports

Sixteen RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.

3. Digital Inputs
    • Eight screw terminals pairs for connecting dry contact devices.
    • Input voltage: 0VDC to +25VDC.
    • Provides +12VDC, 50mA for terminals 1-7, and +12VDC, 350mA for terminal 8 only.
    • Fuse protection.

4. Digital Outputs
    • Four screw terminals pairs.
    • Potential-free relay switch contacts.
    • Normally open / normally closed connection points.
    • Maximum switching load: 0.5A at 100VAC, 1A at 30VDC, 0.5A at 48VDC.

5. Beacon Port

        Fuse protection
      • One screw terminal pair.
      • Provides +12VDC, 180 mA to supply an alarm beacon.

    6. Siren Port
      • One screw terminal pair.
      • Provides +12VDC, 180 mA to supply a siren.
      • Fuse protection

    7. AUX Power
      • One screw terminal pair.
      • Provides 12VDC, 150mA.

    8. USB Device Ports
      • Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
      • Two USB ports on front panel and 2 on back panel.

    9. USB Console Port

    One female USB Type B connector for connecting a PC for serial terminal access.

    10. RS232 (DCS) Port

    One female RJ45 serial port for terminal access.

    11. Ethernet Port
      • One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.
      • Supports full- and half-duplex.

    12. RS232 AUX Port

    One RJ45 port for connecting a serial GSM modem or a remote serially-controlled device.

    13. Cascade In/Out Ports
      • Two RJ45 jacks.
      • A maximum of 5 systems can be used in a cascaded configuration via RS485 to increase the number of sensor ports (1 master, 4 slaves).
      • Each slave unit needs its own unique RS485 address value that can range from 1-255.
      • Use CAT5/5e/6 patch cables with RJ45 connectors wired straight through
      • Up to 4,000 feet between the master unit and the slave unit.
      • The last slave must have a terminating plug (E-TRMPLG, not included) in the empty socket.
      • Uses a single Web interface for all systems connected.


    Protocols
      • HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, TLS v1.2, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0, RADIUS
      • Support for XOAUTH2 provides higher security authentication for email accounts (e.g. Gmail).
      • Compatible with any SNMP management software.
      • The unit can be polled via SNMP.
      • Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface.
      • Supports Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Netscape 9, Google Chrome, Safari 1.3 and higher for MAC, and Safari 3.0 and higher for PC.
      • Multiplatform support: Windows 7/8/10, Windows Server 2008/2012/2016/2019, Solaris, Linux, FreeBSD, and MAC OS 10/11.
      • An IP address can be assigned to the E-16D automatically by a DHCP server.
      • Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).
      • Alerts are posted in event log, which is accessible through Web user interface.
      • Email alerts can be sent to 17 addresses.
      • Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert.
      • SNMP traps have unique OID's (Object Identifiers) for each sensor.
      • OIDs for sensor and contact values for E-16D.
      • Supports HTTP REST API to poll sensor data with response in JSON format.

    Internal Temperature Sensor
      • For monitoring the temperature inside the E-16D case.
      • Use an external temperature sensor for monitoring ambient air temperature.
      • Applications from 32 to 104°F (0 to 40°C).
      • Temperature accuracy:
      • ±1.44°F (±0.8°C) for 32 to 41°F (0 to 5°C).
      • ±0.72°F (±0.4°C) for 41 to 104°F (5 to 40°C).

    Internal Humidity Sensor
      • For monitoring the humidity inside the E-16D case.
      • Use an external humidity sensor for monitoring humidity in the air.
      • Applications from 20% to 80% relative humidity at temperatures between 32 to 104°F (0 to 40°C).
      • Accurate to within ±3% relative humidity (at 77°F/25°C).

    Internal Power Sensor
      • Measures mains voltage: 0 to 255 VAC
      • Measures battery voltage: 0 to 20 VDC
      • Measures voltage on 24VDC models: 20 to 32VDC
      • Measures voltage on 48VDC models: 36 to 72VDC
      • Alerts are sent when there is a power outage and when power returns.

    Back-up Battery

    Dimensions

    WxDxH (all options):

    Without supplied rackmount kit: 16.19x10.01x1.75"

    With supplied rackmount kit: 19x10.01x1.75"

    Weight

    E-16D: 9.5 lb (4.31 kg).

    E-16D-48VDP: 9.6 lbs (4.36 kg).

    MTBF

    NTI Part #

    Hours

    E-16D

    89,884

    E-16DDP

    107,046

    E-16D-24V

    115,143

    E-16D-24VDP

    121,484

    E-16D-48V

    115,143

    E-16D-48VDP

    121,484

    E-16DEL

    89,884

    Environmental

    Operating temperature: 32 to 104°F (0 to 40°C).

    Storage temperature: -22 to 140°F (-30 to 60°C).

    Operating/Storage Relative Humidity: 5 to 90% non-condensing RH.

    Regulatory Approvals

    CE, RoHS

    TAA compliant

    Warranty

    2 years



    E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style Select Length of Low-Cost Water Sensor Cable (x): 1 Foot Cable 10 Foot Cable 50 Foot Cable 100 Foot Cable 200 Foot Cable 400 Foot Cable 600 Foot Cable $3.00 Per Foot Select Length of 2-Wire Cable (y): 5 Foot Cable 10 Foot Cable 20 Foot Cable 50 Foot Cable 100 Foot Cable No Additional Cost
    E-LDx-y Liquid Detection Sensor, Plenum Rope-Style Select Length of Water Sensor Cable (x): 1 Foot Cable 10 Foot Cable 50 Foot Cable 100 Foot Cable 200 Foot Cable 400 Foot Cable 600 Foot Cable 800 Foot Cable 1000 Foot Cable $10.20 Per Foot Select Length of 2-Wire Cable (y): 5 Foot Cable 10 Foot Cable 20 Foot Cable 50 Foot Cable 100 Foot Cable No Additional Cost
    E-CDx-y Chemical Detection Sensor Select Length of Chemical Sensor Cable (x): 1 Foot Cable 10 Foot Cable 50 Foot Cable 100 Foot Cable $24.50 Per Foot Select Length of 2-Wire Cable (y): 5 Foot Cable 10 Foot Cable 20 Foot Cable 50 Foot Cable 100 Foot Cable No Additional Cost
    E-ALDS Addressable Leak Detection Sensor
    E-LLDC-10 Liquid Location Detection Sensor Cable, 10 feet
    E-LLDC-25 Liquid Location Detection Sensor Cable, 25 feet
    E-LLDC-50 Liquid Location Detection Sensor Cable, 50 feet
    E-LLDC-100 Liquid Location Detection Sensor Cable, 100 feet
    E-4WNSC-10 4-Wire Non-Sensing Cable, 10 feet
    E-4WNSC-25 4-Wire Non-Sensing Cable, 25 feet
    E-4WNSC-50 4-Wire Non-Sensing Cable, 50 feet
    E-4WNSC-100 4-Wire Non-Sensing Cable, 100 feet
    E-LD-SPDT Liquid Detection, Spot Detector
    E-SLDO-14 Compact-Size Spot Liquid Detector, Point Leak Detection Sensor, 24V/0.5A US power supply
    E-SLDO-14-240VTR Compact-Size Spot Liquid Detector, Point Leak Detection Sensor, 240/208/120 to 24 VAC power transformer and country-specific line cord
    E-SLDO-A Spot Liquid Detector with Built-In Visual & Audible Alarm
    E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
    E-SOD-3M Outdoor Oil Leak Detection Sensor
    E-UCLD-1 Under Carpet Leak Detector, 1 ft
    E-UCLD-10 Under Carpet Leak Detector, 10 ft
    E-UCLD-25 Under Carpet Leak Detector, 25 ft
    E-UCLD-50 Under Carpet Leak Detector, 50 ft
    E-UCLD-100 Under Carpet Leak Detector, 100 ft
    E-UCLD-200 Under Carpet Leak Detector, 200 ft
    E-UCLD-400 Under Carpet Leak Detector, 400 ft
    E-UCLD-600 Under Carpet Leak Detector, 600 ft
    E-UCLD-1000 Under Carpet Leak Detector, 1000 ft
    E-TLD-10 Liquid Detection - Tape-Style - 10'
    E-TLD-25 Liquid Detection - Tape-Style - 25'
    E-TLD-50 Liquid Detection - Tape-Style - 50'
    E-TLD-100 Liquid Detection - Tape-Style - 100'
    E-LLS-PF Plastic Vertical Liquid Level Float Switch
    E-LLS-SF-10CM Stainless Steel Vertical Liquid Level Float Switch, 10cm
    E-LLS-SF-25CM Stainless Steel Vertical Liquid Level Float Switch, 25cm
    E-ULT Ultrasonic Level Transmitter for small tanks 49.2 inches or less
    E-ULT25IS Intrinsically Safe Ultrasonic Level Transmitter, 25' Range
    E-WFS-GD44 G1/2 Hall Effect Liquid Water Flow Sensor Switch
    E-WFS-GE G3/4 Hall Effect Liquid Water Flow Sensor Switch
    E-SDS-120V Smoke Detection Sensor - 120V
    E-RLY-SDS120V Smoke Alarm Relay Module Compatible with E-SDS-120V
    E-SDS-CELC-V2 Low-Cost Smoke Detection Sensor - CE Approved
    E-SDS Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved
    E-SDS-TAA-V2 Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved, TAA Compliant
    E-CMD Carbon Monoxide Detector - CO
    E-CO2-LC Carbon Dioxide Detector - CO2
    E-GD-MBP Gas Detector – Methane, Butane, Propane
    E-H2 Hydrogen Gas Detector
    E-H2S Hydrogen Sulfide Detector
    E-DUST Optical Dust Sensor
    E-AFM Air Flow Sensor
    E-AV-LC-7 Low-Cost Air Velocity Sensor, 7 ft, Includes RJ45 Coupler to Extend up to 1,000 ft
    E-AV-K Air Velocity Sensor - Requires E-S5VDC
    E-WSS Wind Speed Sensor/Anemometer
    E-BPT Barometric Pressure Transmitter
    E-PST500 Pressure Sensor Transmitter, 0 to 500 psi
    E-PST100IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 100 psig
    E-PST200IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 200 psig
    E-PST500IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 500 psig
    E-PST1000IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 1000 psig
    E-PST3000IS Intrinsically Safe Pressure Sensor Transmitter, 0 to 3000 psig
    E-NLS Noise Level Sensor
    E-FACS Fingerprint Access Control System
    E-ACK-V2 Digital Keypad
    E-RFID-CRD10 RFID EM Cards, 10-Pack
    E-RFID-KYFB10 RFID EM Keyfobs, 10-Pack
    E-EDR-SF Electric Strike Door Release (fail safe)
    E-EDR-SCR-P Electric Strike Door Release (fail secure)
    E-M-DCS3 Door Contact Sensor
    E-M-DCS3-TAA Door Contact Sensor, TAA Compliant
    E-DCS-PS2 Plunger-Style Door Contact Sensor
    E-DCSR-V2 Rugged Door Contact Sensor
    E-DCSR-U Rugged Door Contact Sensor with Universal Style Magnet
    E-VSSB Vibration Sensor - Registers Movement & Shocks
    E-VSSR-10 Rugged Vibration Sensor – Detect Over- or Under-Vibration in Machinery
    E-FENCE1 Fence Vibration Sensor
    E-GBS Glass Break Detection Sensor
    E-IMD-LCV2 Low-Cost Infrared Motion Sensor – CE Compliant
    E-IMD-O Outdoor Infrared Motion Sensor
    E-IMD-OHM High-Mount Outdoor Infrared Motion Sensor
    E-IMD-CM Ceiling Mount Infrared Motion Sensor
    E-IMDM Adaptive Dual Microwave/PIR Motion Detector
    E-PBD-SO50 Single Photobeam Detector, Indoor/Outdoor to 50'
    E-PBD-DO90 Dual Photobeam Detector, Indoor to 190', Outdoor to 90'
    E-PBD-DO190 Dual Photobeam Detector, Indoor to 390', Outdoor to 190'
    E-PBD-DO290 Dual Photobeam Detector, Indoor to 590', Outdoor to 290'
    E-PBD-DO390 Dual Photobeam Detector, Indoor to 790', Outdoor to 390'
    E-TDS Tamper Switch
    E-EBS Emergency / Panic Button
    E-LIS Light Intensity Sensor
    E-AVDS-CELC-V3 Low-Cost Automatic Voice Dialer System, CE, Calls 6 Phone Numbers, 3 Input Channels
    E-AVDS-4G1 4G Automatic Voice Dialer – FDD B2/B4/B12
    E-AVDS-4G3 4G Automatic Voice Dialer – FDD B1/3/5/7/8/20
    E-AVDS-4G4 4G Automatic Voice Dialer – FDD B1/3/4/5/7/8/28
    E-IPCAM-WHNPT-V4 High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera
    E-IPCAM-HNPO-P Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE)
    E-IPCAM-DHNPO-V2P High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)
    E-4GU-1 USB 4G Modem – 4G LTE Bands: 1/2/4/5/7/28
    E-4GU-3 USB 4G Modem – 4G LTE Bands: 1/3/7/8/28/40
    E-ANT2-4GU Two External Antennas for 4GU Modem
    E-4GU-6 USB 4G Modem, TAA Compliant – 4G LTE Bands: 1/2/3/4/5/7/8/12/18/19/20/25/26/28/38/39/40/41
    E-BEEP1-1 Rugged Miniature Piezo Alarm, 103 dB, 1 ft
    E-BEEP1-10 Rugged Miniature Piezo Alarm, 103 dB, 10 ft
    E-BEEP1-50 Rugged Miniature Piezo Alarm, 103 dB, 50 ft
    E-BEEP1-100 Rugged Miniature Piezo Alarm, 103 dB, 100 ft
    E-BEEP1-200 Rugged Miniature Piezo Alarm, 103 dB, 200 ft
    E-BEEP1-400 Rugged Miniature Piezo Alarm, 103 dB, 400 ft
    E-BEEP1-600 Rugged Miniature Piezo Alarm, 103 dB, 600 ft
    E-BEEP1-800 Rugged Miniature Piezo Alarm, 103 dB, 800 ft
    E-BEEP1-1000 Rugged Miniature Piezo Alarm, 103 dB, 1000 ft
    E-BEEP2-1 Miniature Piezo Buzzer, PCB Mount, 85 dB, 1 ft
    E-BEEP2-10 Miniature Piezo Buzzer, PCB Mount, 85 dB, 10 ft
    E-BEEP2-50 Miniature Piezo Buzzer, PCB Mount, 85 dB, 50 ft
    E-BEEP2-100 Miniature Piezo Buzzer, PCB Mount, 85 dB, 100 ft
    E-BEEP2-200 Miniature Piezo Buzzer, PCB Mount, 85 dB, 200 ft
    E-BEEP2-400 Miniature Piezo Buzzer, PCB Mount, 85 dB, 400 ft
    E-BEEP2-600 Miniature Piezo Buzzer, PCB Mount, 85 dB, 600 ft
    E-BEEP2-800 Miniature Piezo Buzzer, PCB Mount, 85 dB, 800 ft
    E-BEEP2-1000 Miniature Piezo Buzzer, PCB Mount, 85 dB, 1000 ft
    E-SRN-M Piezo Siren, 108 dB
    E-BCN-R Alarm Beacon - Small: 2.75x1.69 in (70x43 mm)
    E-BCN-RL Alarm Beacon - Large: 3.94x3.46 in (100x88 mm)
    E-SRN-BCNL-O IP65 Indoor/Outdoor Piezo Siren with LED Strobe Beacon, 110 dB, Blue
    E-SRN-BCNR-O IP65 Indoor/Outdoor Piezo Siren with LED Strobe Beacon, 110 dB, Red
    E-LTA-RYG LED Light Tower with Buzzer Alarm <96> Red, Yellow, Green
    E-ACVDRLY-515 AC Voltage Detector with Relay, NEMA 5-15 plug
    E-ACVDRLY-C14 AC Voltage Detector with Relay, IEC C14 socket
    E-ACDCLM AC & DC Voltage & Current Monitor
    E-DCLM-6 DC Line Monitor
    E-ACLM-P18-V2 AC Power Monitor with Relay 18A, 220 volts
    E-ACLM-P12-V2 AC Power Monitor with Relay 12A, 110 volts
    E-ACLM-P8-V2 AC Power Monitor with Relay 8A, 220 volts
    E-ACLM-V-V2 AC Dual Voltage Monitor
    E-S60VDC DC Voltage Monitor
    E-AMP10-6-5 Hall-Effect Current Sensor, Solid-Core, 10A, 0.26" loop diameter
    E-AMP20-6-5 Hall-Effect Current Sensor, Solid-Core, 20A, 0.26" loop diameter
    E-AMP50-6-5 Hall-Effect Current Sensor, Solid-Core, 50A, 0.26" loop diameter
    E-AMP50-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter
    E-AMP100-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (100)
    E-AMP200-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (200)
    E-AMP300-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (300)
    E-AMP400-SC12 Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter (400)
    E-AMP30-SC21 Hall-Effect Current Sensor, Split-Core, 30A, 0.83" loop diameter
    E-AMP50-SC21 Hall-Effect Current Sensor, Split-Core, 50A, 0.83" loop diameter
    E-AMP100-SC21 Hall-Effect Current Sensor, Split-Core, 100A, 0.83" loop diameter
    E-AMP200-SC21 Hall-Effect Current Sensor, Split-Core, 200A, 0.83" loop diameter
    E-AMP500-SC21 Hall-Effect Current Sensor, Split-Core, 500A, 0.83" loop diameter
    E-ACLM-3P480 3-Phase AC Power Monitor
    E-CT50-SC10 AC Current Transformers, Hinged Split-Core, 50 Amps, 0.39 in Loop Diameter
    E-CT100-SC16 AC Current Transformers, Hinged Split-Core, 100 Amps, 0.63 in Loop Diameter
    E-CT250-SC24 AC Current Transformers, Hinged Split-Core, 250 Amps, 0.94 in Loop Diameter
    E-CT500-SC36 AC Current Transformers, Hinged Split-Core, 500 Amps, 1.42 in Loop Diameter
    E-CT2000-SC76 AC Current Transformer, Removable-Top Split Core, 2000A, 3.02x5.12 in Window
    E-PLSD Programmable LED Sensor Display
    E-RJ8-RS485 8-port RJ45 RS485 Sensor Expander
    E-RJ8-RS485-D 8-port RJ45 RS485 Sensor Expander, Din Mount
    E-RJ8-RS485-R 8-port RJ45 RS485 Sensor Expander, 1RU Rackmount
    E-WIFI-RE Environment Monitoring System WiFi Range Extender
    E-DI16DO16 Digital Input/Output Expander (Open-Collector Outputs)
    E-DI16DOR16-V2 Digital Input/Output Expander, Normally-Open Relay Contact Outputs, Desktop
    E-DI16DO16-D Digital Input/Output Expander, Open-Collector Outputs, DIN Mount
    E-DI16DOR16-V2-D Digital Input/Output Expander, Normally-Open Relay Contact Outputs, DIN Mount
    E-DI16DOR16-V2R Digital Input/Output Expander, Normally-Open Relay Contact Outputs, 1RU Rackmount
    E-DI16DOR16-V22R Digital Input/Output Expander, Normally-Open Relay Contact Outputs, 1RU Dual Side-by-Side Rackmount
    E-SER-2FOSMST RS485/RS232/RS422 to Fiber Converter/Extender, Singlemode, ST Connectors
    E-SER-2FOMMSC RS485/RS232/RS422 to Fiber Converter/Extender, Multimode, SC Connectors
    E-S420MA-24V 4-20mA Sensor Converter
    E-S5VDC 12VDC Sensor Converter
    E-2W-PLNM-3 Plenum 22 AWG 2-Wire Sensor Cable, 3 ft
    E-2W-PLNM-6 Plenum 22 AWG 2-Wire Sensor Cable, 6 ft
    E-2W-PLNM-10 Plenum 22 AWG 2-Wire Sensor Cable, 10 ft
    E-2W-PLNM-25 Plenum 22 AWG 2-Wire Sensor Cable, 25 ft
    E-2W-PLNM-50 Plenum 22 AWG 2-Wire Sensor Cable, 50 ft
    E-2W-PLNM-100 Plenum 22 AWG 2-Wire Sensor Cable, 100 ft
    E-2W-PLNM-300 Plenum 22 AWG 2-Wire Sensor Cable, 300 ft
    E-2W-PLNM-500 Plenum 22 AWG 2-Wire Sensor Cable, 500 ft
    E-2W-PLNM-700 Plenum 22 AWG 2-Wire Sensor Cable, 700 ft
    E-2W-PLNM-1000 Plenum 22 AWG 2-Wire Sensor Cable, 1000 ft
    E-2WO-3 Outdoor 22 AWG 2-Wire Sensor Cable, 3 ft
    E-2WO-6 Outdoor 22 AWG 2-Wire Sensor Cable, 6 ft
    E-2WO-10 Outdoor 22 AWG 2-Wire Sensor Cable, 10 ft
    E-2WO-25 Outdoor 22 AWG 2-Wire Sensor Cable, 25 ft
    E-2WO-50 Outdoor 22 AWG 2-Wire Sensor Cable, 50 ft
    E-2WO-100 Outdoor 22 AWG 2-Wire Sensor Cable, 100 ft
    E-2WO-300 Outdoor 22 AWG 2-Wire Sensor Cable, 300 ft
    E-2WO-500 Outdoor 22 AWG 2-Wire Sensor Cable, 500 ft
    E-2WO-700 Outdoor 22 AWG 2-Wire Sensor Cable, 700 ft
    E-2WO-1000 Outdoor 22 AWG 2-Wire Sensor Cable, 1000 ft
    E-CLP10-LD Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10-pack
    E-CLP100-LD Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 100-pack
    SP-RS485-12V-O Weather Resistant Surge Protector for RS485 Control & 12VDC Power Lines
    E-ISZB Zener Barrier – Intrinsically Safe Barrier
    E-RL-16D Extension Rail Kit
    E-TRMPLG Terminating Plug for RS485 Cascade Configurations
    E-BATTERY2 Replacement Back-up Battery for E-16D (non-UL model dated 4/6/20 or earlier), E-16DEL, E-16DDP, E-16D-24V(DP), E-16D-48V(DP)
    E-BATTERY5 Replacement Back-up Battery for E-16D (UL model or non-UL models dated 4/7/20 or later)
    E-MNG-SH Manage 3000 E-2D/5D/16D units
    E-MNG-SHNR Manage 3000 E-2D/5D/16D/MICRO/1W units. Uses non-renewing permanent license – does NOT require internet connection.
    E-MICRO-TRH Remote Temperature/Humidity Sensor over IP
    E-MICRO-TRHP Remote Temperature/Humidity Sensor over IP, POE
    E-1W Remote 1-Wire Sensor over IP
    E-1WP Remote 1-Wire Sensor over IP, POE
    E-STSM-E7 Plastic Probe-Style Temperature Sensor, -4 to 140°F (-20 to 60°C)
    E-STSMA-E7 Aluminum Probe-Style Temperature Sensor, -4 to 140°F (-20 to 60°C)
    E-STS Temperature Sensor, 32°F to 122°F (0°C to 50°C)
    E-STSP-7 Pipe Temperature Sensor, -40 to 185°F (-40 to 85°C)
    E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor, -4 to 140°F (-20 to 60°C)
    E-STSP-SL-7 Strap-On Pipe Temperature Sensor, Spring-Loaded, -40 to 185°F (-40 to 85°C)
    E-STHSB Temperature/Humidity/Dew Point Sensor, -4 to 185°F (-20 to 85°C)
    E-STHS-LSH Fan-Aspirated Temperature/Humidity/Dew Point Sensor, Low Self-Heating
    E-STHS-LCDW Temperature/Humidity Sensor with 3-Digit 7-Segment LCD Display – 2" Character Height
    E-STHSB-D Temperature/Humidity/Dew Point Sensor, -4 to 185°F (-20 to 85°C), DIN Mounted
    E-STHS-PRC Low-Cost Precision Temperature/Humidity/Dew Point Sensor, 14 to 140°F (-10 to 60°C)
    E-RTDT-140 100 Ohm Platinum RTD Transmitter, -20°F to 140°F (-28°C to 60°C)
    E-RTDT-240 100 Ohm Platinum RTD Transmitter, -30°F to 240°F (-1°C to 115°C)
    E-RTDT-1562 High-Accuracy Platinum RTD Transmitter, -328°F to 1562°F
    E-RTDS-MP240 Mini Probe 100 Ohm RTD Sensor, -67°F to 240°F (-55°C to 115°C)
    E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor, -319 to 482°F, 4-Wire
    E-RTDS-A221 All-Purpose 100 Ohm RTD Sensor, -67°F to 221°F (-55°C to 105°C)
    E-RTDS-A1112 All-Purpose 100 Ohm RTD Sensor, -328°F to 1112°F (-200°C to 600°C)
    E-RTDS-D240 Duct 100 Ohm RTD Sensor, -67°F to 240°F (-55°C to 115°C)
    E-RTDS-ER230 Rugged Encapsulated 100 Ohm RTD Sensor, -30°F to 230°F (-34°C to 110°C)
    E-RTDS-PAR540-2IN Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 1.25" to 2"
    E-RTDS-PAR540-6IN Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 2" to 6"
    E-RTDS-PAR540-12IN Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 6" to 12"
    E-STHSB-N4085IND-10 Industrial Temperature/Humidity Sensor with 10 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
    E-STHSB-N4085IND-25 Industrial Temperature/Humidity Sensor with 25 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
    E-STHSB-N4085IND-35 Industrial Temperature/Humidity Sensor with 35 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
    E-STHSB-N4085IND-50 Industrial Temperature/Humidity Sensor with 50 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
    E-STHSB-N4085IND-100 Industrial Temperature/Humidity Sensor with 100 feet of CAT5E Cable, -40 to 185°F (-40 to 85°C)
    E-STS-O IP65 Outdoor Temperature Sensor
    E-16D 1,000 data log entries; 1,000 event log entries-AC
    E-16DDP 1,000 data log entries; 1,000 event log entries-Dual AC
    E-16D-24V 1,000 data log entries; 1,000 event log entries-24VDC
    E-16D-24VDP 1,000 data log entries; 1,000 event log entries-Dual 24VDC
    E-16D-48V 1,000 data log entries; 1,000 event log entries-48VDC
    E-16D-48VDP 1,000 data log entries; 1,000 event log entries-Dual 48VDC
    E-16DEL 1,200,000 data log entries; 3,000 event log entries-AC