079 27702711

+91 9714854011

Product Catalogues

Secure Remote Power Control Unit with Environmental Monitoring

Secure Remote Power Control Unit with Environmental Monitoring

Model No : IPDU-S2

Weight In KG :0.45359

Weight In LB :1.0



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • Secure Remote Power Control Unit allows you to remotely reboot and control power (on/off) to two servers or other powered devices from any location via secure web interface, RS232, SSH, or Telnet.
      • Three operating modes for power reboot:
      • Manual – select the outlet and turn the power on/off.
      • Scheduled – set date/time/duration of power cycle.
      • Associated
      • Power on/off a device when a sensor goes out of range of a user-defined threshold.
      • Reboot (power cycle) and control power (on/off) to unresponsive IP devices that are connected to the IPDUs power outlets.
      • Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
      • Configure, control and monitor the unit via Web interface or Command Line Interface (CLI).
      • Up to 3 additional IP aliases can be configured to allow remote control of the unit using different networks.
      • No scripts required - simply add the IP address, network mask, and gateway configurations through the web interface.
      • The first network (default network) will be used for total control of the unit, i.e. inbound and outbound connections.
      • The three other networks will allow web/SSH/telnet access only, i.e. inbound access only.
      • Up to four separate networks can be plugged into a network switch that is linked to the unit to facilitate the configuration.
      • Supports two environmental sensors, including: temperature/humidity and water detection.
      • Shut down power when high temperature and other environmental threats are detected.
      • Monitor (ping) up to eight IP network devices.
      • Unresponsive IP devices can be configured to trigger devices connected to the IPDUs power outlets to power on/off/reboot.
      • Sends alert notifications via email, syslog, LEDs, Web page, and SNMP.
      • Automatically configures network settings received from a connected DHCP server.
      • If a DHCP server is not found, the default static IP address will be used.
      • Integrates with various Open Source monitoring packages - Nagios and MRTG.
      • The unit can be polled via SNMP.
      • Meets the electrostatic discharge (ESD) immunity requirements of IEC/EN 61000-4-2
      • Features Normally Open (NO) relay contacts.


TECHNICAL 

 Power
    • 90 to 250 VAC at 50 to 60 Hz.
    • Power consumption: 2.7W max
    • Input Connector: IEC 320-C14 inlet
    • Output Connectors: IEC 320-C13 outlets

RJ45 Sensor Ports

Two RJ45 modular jacks for connecting NTI temperature/humidity and liquid detection sensors.

Network Interface

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.

Console Port

One female RJ45 port for terminal access.

Dimensions

NTI Part #

Desktop Size (in)

IPDU-S2

6.12x5.55x1.4

Environmental

Operating temperature: 32 to 122°F (0 to 50°C).

Storage temperature: -13 to 149°F (-25 to 65°C).

MTBF

NTI Part #

MTBF (hrs)

IPDU-S2

183,724

Protocols
    • HTTPS, SSHv2, SSLv3, TLS, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, SNMPv2c; IP filtering, IPV6
    • Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or RS232 interface.
    • Alerts are sent using email, syslog, and/or SNMP traps.
    • Alerts are posted in event log, which is accessible through Web user interface.

Regulatory Approvals

CE, RoHS

EN51055, EN50121-3-2

TAA compliant.

Warranty

2 years



E-STS Temperature Sensor, 32°F to 122°F (0°C to 50°C)
E-LDTx-y Liquid Detection System (X- 1 Foot Cable to 1000 Foot Cable) (Y- 5 Foot Cable to 100 Foot Cable)
E-TRMPLG Terminating Plug for RS485 Cascade Configurations
IPDU-S2 Normally Open-10A-2