4K DisplayPort USB KVM HDBaseT Extender transmits uncompressed digital Ultra-HD 4Kx2K 60Hz 4:4:4 DisplayPort signal, transparent USB, stereo audio, and RS232 up to 328 feet over a single HDBaseT-certified CAT6A cable. Each extender consists of a local unit that connects to a computer, and a remote unit that connects to a UHD DisplayPort display and USB 2.0 device.
Transmits an uncompressed high-speed DisplayPort signal over one CAT6a/7 cable using HDBaseT technology.
Supports Ultra-HD 4Kx2K resolutions to 3840x2160 @60Hz YUV 4:4:4, and HDTV resolutions to 1080p @60Hz.
Using HDBaseT-certified CAT6a cable, extend up to 328 feet (100 meters).
Using standard CAT6a/7 cable, extend up to 175 feet (53 meters).
DisplayPort features supported:
DisplayPort 1.2
48-bit Color
RGB, YCbCr 4:4:4, YCbCr
4:2:2
LPCM, Dolby TrueHD, and
DTS-HD Master Audio
Does NOT support MST.
HDCP 1.3 compliant.
Four USB 2.0 ports
support fully transparent USB connections.
Extend USB devices such
as a keyboard, mouse, game controller, USB flash drive, touch screen monitor,
whiteboard, etc.
Compliant with USB 2.0
(low/full/high speed) standards.
Supports DP-embedded
digital audio and 3.5mm stereo audio input/output.
Supports full-duplex
RS232 at 115200 baud.
Mounting brackets
included for easy surface/wall mounting.
TECHNICAL
Local Unit
Compatible with a USB computer or UHD video source with DisplayPort output.
Multiplatform support: Windows 7/10/11, Linux, and MAC OS 10/11/12/13.
One female DisplayPort connector.
One female USB Type B connector.
One female 3.5 mm port for RS232 connection.
Two female 3.5mm stereo audio ports for line in and line out.
One female USB Micro B connector for firmware updates.
One female RJ45 port for sending/receiving UHD video, audio, USB, and RS232 signals.
HDCP compliant.
Remote Unit
One female DisplayPort connector for monitor.
Four female USB Type A connectors.
Transparent data extension.
Supports high-speed (480 Mbps), full-speed (12 Mbps), or low-speed (1.5 Mbps) USB devices – keyboard, mouse, game controller, USB flash drive, touch screen monitor, whiteboard, etc.
One female 3.5 mm port for RS232 connection.
Support full-duplex RS232 up to 115200 baud.
Two female 3.5mm stereo audio ports for line in and line out.
One female USB Micro B connector for firmware updates.
One female RJ45 port for sending/receiving UHD video, audio, USB, and RS232 signals.
Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 @60Hz 4:4:4).
Supports embedded digital audio through DisplayPort compatible displays or audio receivers.
HDCP compliant.
Dimensions
WxDxH (in): 4.89x4.81x1.25 (124x122x32 mm)
Power
Local unit:
Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Output: 12VDC, 1.5A
Remote unit:
Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Output: 12VDC, 2.5A
The current passing through each USB port cannot exceed 0.5A.
Environmental
Operating temperature: -4 to 158°F (-20 to 70°C).
Storage temperature: -40 to 185°F (-40 to 85°C).
Operating/storage relative humidity: up to 95% non-condensing RH
Regulatory Approvals
FCC, RoHS
TAA compliant
Warranty
2 years
Max Distance
Using HDBaseT-certified CAT6a cable, extend up to 328 feet (100 meters).
Using standard CAT6a/7 cable, extend up to 175 feet (53 meters).
Cables
Interface cables between the source/display and the transmitter/receiver are required for proper operation.
Use DP-xx-MM to connect a DisplayPort source or display up to 15 feet.
Use DP4K21GB-FO-xxM-MM to connect a DisplayPort source or display up to 100 meters.
Use CAT6a/7 solid straight through cables for TIA/EIA 568B wiring terminated with standard RJ45 connectors.
Use HDBaseT-certified CAT6a cable to extend up to 328 feet (100 meters).
Use standard CAT6a/7 cable to extend up to 175 feet (53 meters).
Use a male USB Type A to male USB Type B interface cable.
Use male 3.5mm to female/male DB9 cables for RS232.