079 27702711

+91 9714854011

Product Catalogues

4K 18Gbps HDMI Extender Over IP

4K 18Gbps HDMI Extender Over IP via One LC Singlemode/Multimode Fiber Optic Cable

Model No : ST-IPFO4K18GB-LC

Weight In KG :1

Weight In LB :2.20462



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • 4K 18Gbps HDMI Extender Over IP via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, audio, IR, and RS232 up to 24.8 miles (40 kilometers) away from an HDMI source using a single LC singlemode fiber optic strand or 1,640 feet (500 meters) using LC multimode fiber optic cable.
      • Each 4K 18Gbps HDMI Extender Over IP consists of a local unit that connects to an HDMI source and a local display via the HDMI loop output, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connection via a 10G SFP network switch. Support for multiple transmitters requires a managed 10G SFP network switch.
      • Signal transmission via single-strand LC fiber optic cable.
      • Using singlemode 9-micron cable, extend to 24.8 miles (40 km).
      • Using 50-micron OM2 (or better) multimode cable, extend to 1,640 feet (500 meters).
      • Zero latency.
      • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
      • Cascade network switches to extend the length longer distances.
      • Up to 12 switches can be cascaded.
      • HDMI features supported:
      • HDMI 2.0
      • 8-bit, 10-bit, and 12-bit Deep Color
      • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 7.1CH, DTS 5.1, and DTS:X
      • RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0/li>
      • Bandwidth up to 600 Mhz (18Gbps)
      • 3D (1080p @60Hz)
      • Support for CEC (consumer electronic control) compatible devices.
      • HDR10
      • ARC
      • HDCP 2.2 and 1.4 compliant.
      • Supports local and remote HDMI displays.
      • For a point-to-many connection, a standalone network with an unmanaged 10G SFP network switch, hub, or router can be used instead of a managed SFP network switch.
      • Easily expandable. Add remote units as you add monitors.
      • Up to 255 receivers supported.
      • It is not recommended to use any other network devices on this standalone network as it may cause degradation in performance.
      • Support for multiple transmitters (many-to-many connection) requires a managed 10G SFP network switch with IGMP support and Jumbo frame support. Standard LAN switches can only support one transmitter.
      • The managed 10G SFP network switch must support port-based IEEE 802.1Q VLAN.
      • Each VLAN acts as a separate HDMI Over IP Channel on the network.
      • Each VLAN channel supports one transmitter.
      • The number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
      • Plug and play installation allows receivers to find the transmitters automatically on the same subnet.
      • Local and remote units must be in the same LAN. The units do not support WAN connections.
      • Built-in default EDID table.
      • Supports full-duplex RS232 up to 115200 baud.
      • Bi-directional IR control from input and output locations.
      • Supports HDMI embedded digital audio and ARC audio extraction via Toslink connection.
      • Built-in surge and ESD protection.
      • Mounting brackets included for easy surface/wall mounting.

TECHNICAL 

Local Unit

      • One female HDMI connector for source connection.
      • One female HDMI connector for local display.
      • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
      • Supports embedded digital audio.
      • Two 3.5mm ports connecting an IR emitter and receiver (included).
      • IR frequency range: 20 to 60 kHz.
      • 3-pin screw terminal for RS232.
      • Supports full-duplex RS232 up to 115200 baud.
      • One TOSLINK optical port for HDMI ARC audio extraction..
      • One simplex LC fiber optic port for sending/receiving video/audio, IR, and RS232 signals.
      • One female USB Micro Type B connector for firmware updates.
      • Supports HDCP 2.2 and 1.4.
Remote Unit
      • One female HDMI connector for display.
      • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
      • Supports embedded digital audio.
      • Two 3.5mm ports connecting an IR emitter and receiver (included).
      • IR frequency range: 20 to 60 kHz.
      • 3-pin screw terminal for RS232.
      • Supports full-duplex RS232 up to 115200 baud.
      • One TOSLINK optical port for SPDIF digital audio.
      • One simplex LC fiber optic port for sending/receiving video/audio, IR, and RS232 signals.
      • One female USB Micro Type B connector for firmware updates./li>
      • Supports HDCP 2.2 and 1.4.
Power

Local and remote unit:

    Input: 100 to 240 VAC at 50 or 60Hz via AC adapter. (Country-specific power supplies included.)

    Output:US power supply: 5VDC, 2A

    UK, EU, AUS power supplies: 5VDC, 3A


    Power consumption:

      Local unit: 4.6W

      Remote unit: 4.1W

      Dimensions

      WxDxH (in): 4.88x4.54x1.18 (124x115x30 mm)

      Environmental

      Operating temperature: -4 to 140°F (-20 to 60°C).

      Storage temperature: -22 to 158°F (-30 to 70°C).

      Operating relative humidity: 0 to 90% non-condensing RH.

      Max Distance

      24.8 miles (40 km) over 9μm singlemode LC fiber optic cable.

      1,640 feet (500 meters) over 50μm OM2 (or better) multimode LC fiber optic cable.

      Cables
          • Interface cables between the source/display and the transmitter/receiver are required for proper operation.
          • Supports cable lengths to 20 feet for 4K resolutions and lengths to 50 feet for 1080p@60Hz using passive HDMI cables.
          • Use HD-xx-MM cable to connect an HDMI source or display.
          • Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI computer up to 50 feet.
          • Use USB3C-HD4K-xx-MM to connect a 4K computer with USB Type C connector up to 10 feet.
          • Use DVI-HD-xM-MM to connect a DVI computer up to 5 meters.
          • Supports resolutions to 1080p.
          • Use a simplex LC singlemode 9-micron fiber optic cable to extend the receiver from the transmitter up to 24.8 miles (40 km).
          • Use FIBER-AD-SS-SCFLCM to convert a male simplex SC singlemode connector to a male simplex LC singlemode connector.
          • Use a simplex LC multimode 50-micron OM2 (or better) fiber optic cable to extend the receiver from the transmitter up to 1,640 feet (300 meters).
          • Cables not included.
      Regulatory Approvals

      CE, FCC, RoHS

      Warranty

      2 years.

      Package Includes
          • One transmitter unit
          • One receiver unit
          • One T1270/R1330nm 10G Base-T SFP module
          • One T1330/R1270nm 10G Base-T SFP module
          • One IR emitter
          • One IR receiver
          • Two power supplies
          • Mounting brackets


      HD-3-MM 3 feet
      HD-6-MM 6 feet
      HD-10-MM 10 feet
      HD-15-MM 15 feet
      HD-25-MM 25 feet
      HD-30-MM 30 feet
      HD-50-MM 50 feet
      DVI-HD-1M-MM 1 meter
      DVI-HD-2M-MM 2 meter
      DVI-HD-3M-MM 3 meter
      DVI-HD-5M-MM 5 meters
      FIBER-S-LCLC-50G-50M-PLNM 50 m
      FIBER-AD-SS-SCFLCM SC Female to LC Male Simplex Singlemode Fiber Optic Adapter
      USB3C-HD4K-3-MM 3 ft
      USB3C-HD4K-6-MM 6 ft
      USB3C-HD4K-10-MM 10 ft
      HD-ACT-20-MM 20 feet
      HD-ACT-25-MM 25 feet
      HD-ACT-30-MM 30 feet
      HD-ACT-40-MM 40 feet
      HD-ACT-50-MM 50 feet