Weight In KG :1
Weight In LB :2.20462
Industrial 12V PoE, PoE+ Injector
Industrial 12V PoE, PoE+ Injector
Model No : IJG7001
Multi-Protocol support Mode A and Mode B selection Durable hardwareINTRODUCTION
Power over Ethernet is a convenient tool to simplify industrial network and IoT
setups, and is now widely utilized in end devices such as wireless APs or IP
cameras. The IJG7001 PoE injector supports IEEE 802.3at (PoE+) as well as the
legacy IEEE 802.3af (PoE), so you can provide PoE power to virtually any
device.
IJG7001 supports both Mode A and Mode B for 802.3af/at. Say goodbye to the
hassle of finding the model type you need, and simply adjust IJG7001’s
DIP-Switch setting according to your device.
With strong EMC protection and a wide operating range, IJG7001 can be installed
on machine-side to reduce the cost of power supply equipment and thus the
overall cost of ownership.
TECHNICAL
ETHERNET
| Compliance | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3af for Power-over-Ethernet (PoE - max 15.4W) IEEE 802.3at for Power-over-Ethernet (PoE+ - max 30.0W) |
| PoE
modes | Mode
A/ Mode B DIP-Switch selectable Mode A: PoE power through data pins (1,2,3,6) Mode B: PoE power through spare pins (4,5,7,8) |
| RJ
45 Transmission Rate | 10/100/1000
Mbps |
| Auto
MDI/MDI-X | Yes |
LED
| Indicators | P1, P2, PoE |
POWER
| Input Voltage | 6~48 VDC |
| Input Current (@ 6VDC) | 0.5A max, 6 VDC |
| PoE Voltage Booster | Yes (Max support 30W) |
| Max. Power Consumption | 30W |
PHYSICAL CHARACTERISTICS
| Housing | IP30 metal housing |
| Dimension (W x H x D) | 32 x 110 x 90 mm |
| Weight | 340 g |
| Installation | DIN-Rail , Wall mount (optional kit) |
ENVIRONMENTAL LIMITS
| Operating Temperature | -40°C to +75°C (-40°F to +167°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Ambient Relative Humidity | 5% to 95% (Non-condensing test @55°C) |
