079 27702711

+91 9714854011

Product Catalogues

HDMI OVER FIBER EXTENDER

HDMI OVER FIBER EXTENDER

Model No : PA-IPFOHD-LC

Weight In KG :7.6

Weight In LB :16.75511



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • HDMI Extender Over IP via Fiber Optic Cable transmits digital video, embedded audio, and IR signals up to 24.8 miles (40 kilo meters) away from an HDMI source using a single LC single mode Fiber optic strand or 984 feet (300 meters) using OM3 LC multimode Fiber optic cable.
      • Each HDMI Extender Over IP consists of a local unit that connects to an HDMI source and also supplies video to a local monitor, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connections via a network switch. Support for multiple transmitters requires a managed network switch.

      FEATURES

          • Signal transmission via single-strand LC Fiber optic cable.
          • Supports HDTV resolutions to 1080p.
          • Cascade network switches to extend the length longer distances.
          • HDMI features supported:
            • HDMI 1.3
            • 36-bit Deep Colour
            • RGB, YCbCr 4:4:4, and YCbCr 4:2:2
            • LPCM
            • Bandwidth up to 4.46 Gbps
          • HDCP 1.4 compliant.
          • Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
          • For a point-to-many connections, a standalone network with an unmanaged SFP network switch, hub, or router can be used instead of a managed SFP network switch.
          • Support for multiple transmitters (many-to-many connection) requires a managed SFP switch with VLAN support. Standard LAN switches can only support one transmitter.
          • Plug-and-Play installation allows receivers to find the transmitters automatically on the same subnet.
          • Local and remote units must be in the same LAN. The units do not support WAN connections.
          • Buffered HDMI input loop-through.
          • Built-in default EDID table.
          • Cables can be installed in conduit prior to extender installation.
          • Integrated mounting brackets for easy surface/wall mounting.
          • HDMI Extender Over IP via Fiber Optic Cable transmits digital video, embedded audio, and IR signals up to 24.8 miles (40 kilo meters) away from an HDMI source using a single LC single mode Fiber optic strand or 984 feet (300 meters) using OM3 LC multimode Fiber optic cable.
          • Each HDMI Extender Over IP consists of a local unit that connects to an HDMI source and also supplies video to a local monitor, and a remote unit that connects to an HDMI display.
          • The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connections via a network switch.
          • Support for multiple transmitters requires a managed network switch


      TECHNICAL

      Local Unit

      One female HDMI connector for source connection.

      One female HDMI connector for local monitor.

      Supports HDTV resolutions to 1080p @60Hz.

      One 3.5mm port for IR emitter (included).

      IR frequency range: 20 to 60 kHz.

      One simplex LC Fiber optic port for sending/receiving video/audio and IR signals.

      Supports HDCP 1.4.
      Remote Unit

      One female HDMI connector for monitor.

      Supports HDTV resolutions to 1080p @60Hz.

      One 3.5mm port for IR receiver (included).

      IR frequency range: 20 to 60 kHz.

      One simplex LC Fiber optic port for sending/receiving video/audio and IR signals.

      Encoding delay: 100 ms latency

      Supports HDCP 1.4.
      Power

      Local and remote unit:

      Input: 100 to 240 VAC at 50 or 60Hz via AC adapter. (Country-specific power supplies included.)

      Output:

      US power supply: 5VDC, 2A

      UK, EU, AUS power supplies: 5VDC, 3A

      Power consumption: 3W each.
      Environmental

      Operating temperature: -4 to 140°F (-20 to 60°C).

      Storage temperature: -22 to 158°F (-30 to 70°C).

      Operating relative humidity: 0 to 90% non-condensing RH.
      Dimensions

      WxDxH (in): 5.43x3.21x0.94 (138x82x24 mm)

      Max Distance:

      24.8 miles (40 km) over 9μm single mode LC Fiber optic cable.

      984 feet (300 meters) over 50μm OM3 (or better) multimode LC Fiber optic cable.
      Cables

      Use a simplex LC single mode 9-micron Fiber optic cable to extend the receiver from the transmitter up to 24.8 miles (40 km).

      Use FIBER-AD-SS-SCFLCM to convert a male simplex SC single mode connector to a male simplex LC single mode connector.

      Use a simplex LC multimode 50-micron OM3 (or better) Fiber optic cable to extend the receiver from the transmitter up to 984 feet (300 meters).

      Use HD-xx-MM cables to connect an HDMI source or display up to 50 feet.

      Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet.

      Use DVI-HD-xM-MM cables to connect a DVI source up to 5 meters.

      Use USB3C-HD4K-xx-MM to connect a USB-C or Thunderbolt 3 device up to 10 feet.

      Cables not included.
      Regulatory Approvals
      		CE, FCC, RoHS

      DIAGRAM

      POINT-TO-POINT CONNECTION


      POINT-TO-MANY CONNECTIONS USING AN UNMANAGED GIGABIT SFP SWITCH

      MANY-TO-MANY CONNECTIONS USING AN UNMANAGED GIGABIT SFP SWITCH