079 27702711

+91 9714854011

Product Catalogues

Audio/Video Matrix Switch

Audio/Video Matrix Switch

Model No : SM-8X8-AV-LCD

Weight In KG :3.62874

Weight In LB :8

Description
Sepcification
Download
Buy

INTRODUCTION

The SM-nXm-AV-LCD audio/video matrix switch routes audio and video input from many computers to multiple displays (projectors, monitors, etc.) and speakers. This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors.
Signals from a range of input sources can be distributed to various output devices. A single computer video output can be routed to one or more monitors. Each video output is buffered from each input, ensuring signal integrity throughout the system. When switching ports, the audio automatically mutes until the video has been synchronized. The audio can also be muted on command.
Configure and control the switch through Ethernet, serial port or front panel buttons.
NTI Switch Control Program with Graphical User Interface (GUI control) is included.
Equipped with Liquid Crystal Display (LCD) and RS232 Control.
Switch VGA video directly.
Each output provides one video signal and one stereo audio signal.
Each input can be independently connected to any or all outputs.
Video bandwidth is 200 MHz or greater.
Supports 1920x1200 video resolution at a refresh rate of 85 Hz.
Crestron® compatible.
The VEEMUX switch is the ideal solution for any application where information from many computers is being presented, such as:
Digital signage.
Classrooms.
Boardrooms.
Trade shows.
Conference and entertainment facilities.
Courtrooms.
Command centers.
Control rooms.

TECHNICAL
8X4
Video Input
Eight Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Four Female 15-pin HD connectors.
1920x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Audio Input
Eight 3.5 mm stereo audio jacks.
Impedance: 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
Four 3.5 mm stereo audio jacks.
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
Total Harmonic Distortion + Noise: 0.01% at 1 kHz.
Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
200 mW RMS of continuous power per output.
When switching ports, audio mutes until video has been synchronized.
MTBF
59,106 hrs.
Power
110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 15 W

Add -48V5V10A2, optional internal DC-DC converter, to install the SM-8x4-AV-LCD in a Telecom environment.
Cables
Interface cables between the video sources/displays and the switch are required for proper operation.
Supports cable lengths to 20 feet for 4Kx2K resolutions at 60Hz and lengths to 50 feet for 1080p at 60Hz using passive HDMI cables.
Cables longer than 50 feet can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
Use HD-xx-MM HDMI cables to connect an HDMI source or display.
HD-3/6/10/15-MM supports resolutions to 4K@60Hz.
HD-25/30/50-MM supports resolutions to 1080p@60Hz.
Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
HD-ACT-20/25/30/40/50/60-MM supports resolutions to 4K@60Hz (18 Gbps).
HD-ACT-75/100-MM supports resolutions to 4K@30Hz (10.2 Gbps).
Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet away from the switch.
Supports resolutions up to 4k@30hz 4:4:4 and 4K@60Hz 4:2:0.
Cables not included.
Environmental
Operating temperature: 32 to 100°F (0 to 38°C)
Storage temperature: -20 to 140°F (-30 to 60°C)
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, FCC, RoHS
Warranty
2 Years

Audio/Video Matrix Switch Dimensions

NTI Part #

Rack
Units

Size
WxDxH (in)

SM-8X4-AV-LCD

2RU

19x10x3.5

8X8
Video Input
Eight Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Eight Female 15-pin HD connectors.
1920x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Audio Input
Eight 3.5 mm stereo audio jacks.
Impedance: 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
Eight 3.5 mm stereo audio jacks.
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
Total Harmonic Distortion + Noise: 0.01% at 1 kHz.
Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
200 mW RMS of continuous power per output.
When switching ports, audio mutes until video has been synchronized.
MTBF
54,568 hrs.
Power
110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 20 W

Add -48V5V10A2, optional internal DC-DC converter, to install the SM-8X8-AV-LCD in a Telecom environment.
Cables
Interface cables between the computers and the switch are required for proper operation.
Recommended NTI video cables:
VGA interface cable (VEXT-xx-MM).
VGA to BNC cable (VINT-5B-6).
Recommended NTI audio cables:
SA-xx-MM.
Cables not included.
Environmental
Operating temperature: 32 to 100°F (0 to 38°C)
Storage temperature: -20 to 140°F (-30 to 60°C)
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, FCC, RoHS
Warranty
2 Years
Audio/Video Matrix Switch Dimensions
NTI Part #
Rack
Units
Size
WxDxH (in)
SM-8X8-AV-LCD
2RU
19x12x3.5

16X2
Video Input
Sixteen Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Two Female 15-pin HD connectors.
1920x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Audio Input
Sixteen 3.5 mm stereo audio jacks.
Impedance: 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
Two 3.5 mm stereo audio jacks.
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
Total Harmonic Distortion + Noise: 0.01% at 1 kHz.
Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
200 mW RMS of continuous power per output.
When switching ports, audio mutes until video has been synchronized.
MTBF
62,031 hrs.
Power
110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 15 W
Add -48V5V10A, optional internal DC-DC converter to install the SM-16x2-AV-LCD in a Telecom environment.
Cables
Interface cables between the computers and the switch are required for proper operation.
Recommended NTI video cables:
VGA interface cable (VEXT-xx-MM).
VGA to BNC cable (VINT-5B-6).
Recommended NTI audio cables:
SA-xx-MM.
Cables not included.
Environmental
Operating temperature: 32 to 100°F (0 to 38°C)
Storage temperature: -20 to 140°F (-30 to 60°C)
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, FCC, RoHS
Warranty
2 Years
Audio/Video Matrix Switch Dimensions
NTI Part #
Rack
Units
Size
WxDxH (in)
SM-16X2-AV-LCD
2RU
19x10x3.5

16X16
Video Input
Sixteen Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Sixteen Female 15-pin HD connectors.
1920x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Audio Input
Sixteen 3.5 mm stereo audio jacks.
Impedance: 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
Sixteen 3.5 mm stereo audio jacks.
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
Total Harmonic Distortion + Noise: 0.01% at 1 kHz.
Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
200 mW RMS of continuous power per output.
When switching ports, audio mutes until video has been synchronized.
MTBF
48,879 hrs..
Power
110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 30 W
Add -48V5V10A2, optional internal DC-DC converter, to install the SM-16x16-AV-LCD in a Telecom environment.
Cables
Interface cables between the computers and the switch are required for proper operation.
Recommended NTI video cables:
VGA interface cable (VEXT-xx-MM).
VGA to BNC cable (VINT-5B-6).
Recommended NTI audio cables:
SA-xx-MM.
Cables not included.
Environmental
Operating temperature: 32 to 100°F (0 to 38°C)
Storage temperature: -20 to 140°F (-30 to 60°C)
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, FCC, RoHS
Warranty
2 Years
Audio/Video Matrix Switch Dimensions
NTI Part #
Rack
Units
Size
WxDxH (in)
SM-16X16-AV-LCD
3RU
19x12x5.25

32X2
Video Input
Thirty-two Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Two Female 15-pin HD connectors.
1920x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Audio Input
Thirty-two 3.5 mm stereo audio jacks.
Impedance: 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
Two 3.5 mm stereo audio jacks.
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
Total Harmonic Distortion + Noise: 0.01% at 1 kHz.
Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
200 mW RMS of continuous power per output.
When switching ports, audio mutes until video has been synchronized.
MTBF
49,923 hrs.
Power
110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 20 W
Add -48V5V10A2, optional internal DC-DC converter, to install the SM-32x2-AV-LCD in a Telecom environment.
Cables
Interface cables between the computers and the switch are required for proper operation.
Recommended NTI video cables:
VGA interface cable (VEXT-xx-MM).
VGA to BNC cable (VINT-5B-6).
Recommended NTI audio cables:
SA-xx-MM.
Cables not included.
Environmental
Operating temperature: 32 to 100°F (0 to 38°C)
Storage temperature: -20 to 140°F (-30 to 60°C)
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, FCC, RoHS
Warranty
2 Years
Audio/Video Matrix Switch Dimensions
NTI Part #
Rack
Units
Size
WxDxH (in)
SM-32X2-AV-LCD
4RU
19x12x7

32X16
Video Input
Thirty-two Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output
Sixteen Female 15-pin HD connectors.
1920x1200 video resolution with no degradation.
Impedance: 75 Ohms.
Bandwidth: 200 Mhz, fully loaded.
Audio Input
Thirty-two 3.5 mm stereo audio jacks.
Impedance: 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
Sixteen 3.5 mm stereo audio jacks.
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
Total Harmonic Distortion + Noise: 0.01% at 1 kHz.
Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
200 mW RMS of continuous power per output.
When switching ports, audio mutes until video has been synchronized.
MTBF
42,025 hrs.
Power
110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 35 W

Add -48V5V10A2, optional internal DC-DC converter, to install the SM-32x16-AV-LCD in a Telecom environment.
Cables

Interface cables between the computers and the switch are required for proper operation.
Recommended NTI video cables:
VGA interface cable (VEXT-xx-MM).
VGA to BNC cable (VINT-5B-6).
Recommended NTI audio cables:
SA-xx-MM.
Cables not included.
Environmental
Operating temperature: 32 to 100°F (0 to 38°C)
Storage temperature: -20 to 140°F (-30 to 60°C)
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approval
CE, FCC, RoHS
Warranty
2 Years
Audio/Video Matrix Switch Dimensions
NTI Part #
Rack
Units
Size
WxDxH (in)
SM-32X16-AV-LCD
4RU
19x12x7

VEXT-1-5-MM	1.5 feet (Black)
VEXT-3-MM	3 feet (Black)
VEXT-6-MM	6 feet (Black)
VEXT-10-MM	10 feet (Black)
VEXT-15-MM	15 feet
VEXT-25-MM	25 feet

VEXT-F-1-5-MM	1.5 feet (Black)
VEXT-F-6-MM	6 feet (Black)
VEXT-F-10-MM	10 feet (Black)
VEXT-F-15-MM	15 feet (Black)
VEXT-F-25-MM	25 feet (Black)
VEXT-F-35-MM	35 feet (Black)
VEXT-F-50-MM	50 feet (Black)
VEXT-F-75-MM	75 feet (Black)
VEXT-F-100-MM	100 feet (Black)

SA-3-MM	3 ft
SA-6-MM	6 ft
SA-10-MM	10 ft
SA-15-MM	15 ft
SA-25-MM	25 ft
SA-35-MM	35 ft
SA-50-MM	50 ft
SA-100-MM	100 ft

6 feet	VEXT-6 (Black)
VEXT-100-GRAY	100 feet (Grey)

VEXT-F-3	3 feet
VEXT-F-6	6 feet
VEXT-F-10	10 feet
VEXT-F-15	15 feet
VEXT-F-25	25 feet
VEXT-F-50	50 feet
VEXT-F-75	75 feet
VEXT-F-100	100 feet

VINT-5B-6

6 ft

SM-8X4-AV-LCD	8X4 Audio/Video Matrix Switches
SM-8X8-AV-LCD	8X8 Audio/Video Matrix Switches
SM-16X2-AV-LCD	16X2 Audio/Video Matrix Switches
SM-16X16-AV-LCD	16X16 Audio/Video Matrix Switches
SM-32X2-AV-LCD	32X2 Audio/Video Matrix Switches
SM-32X16-AV-LCD	32X16 Audio/Video Matrix Switches